Bios; Overview - Dell PowerEdge R210 II Technical Manual

Dell

9 BIOS

9.1 Overview

The R210 II BIOS is based on the Insyde

Simultaneous Multi-Threading (SMT) support

PCI 2.3 compliant

Plug and Play 1.0a compliant

MP (Multiprocessor) 1.4 compliant

Ability to boot from hard drive, optical drive, iSCSI drive, USB key, and SD card

ACPI 2.0 support (S0, OS-S4, S5 States)

PXE and WOL support for on-board NICs

SETUP access through <F2> key at end of POST

USB 2.0 (USB boot code is 1.1 compliant)

F1/F2 error logging in CMOS

Virtual KVM, CD, and floppy support

iDRAC supported

Unified Server Configurator (UEFI 2.1) support

Power management support including DBS, Power Inventory and multiple Power Profiles:
o Maximum Performance
o OS Control (DBS)
o Custom

SMBIOS 2.5

PCI-to-PCI bridge 1.0 compliant

Dell Server Assistant 7.0 support

System Service support

Onboard PCI video BIOS support

SATA-enabled for CD-ROM and hard drives

PCI FW 3.0 compliant

Selectable Boot support

El Torito CD-ROM Boot 1.0

Remote BIOS Update support

Remote Configuration Interface (RCI) support

Console redirection through COM1

PXE support based on Preboot Execution Environment Specification v2.1

2-byte ID support

ePPID support in flash

Memory remapping support

DDR3 UDIMM memory support

UEFI shell Support

AC recovery staggering Power-Up

DIMM mismatch checking

VT-d
The PowerEdge R210 II BIOS does not support the following:

BIOS language localization

BIOS recovery after bad flash

RIB Support
PowerEdge R210 II Technical Guide
®
BIOS core which supports the following features:
32