Dell PowerEdge T710 Technical Manual page 12

Dell
Feature
Communications
Power Supply
Availability
Video
Remote Management
Systems Management
Rack Support
PowerEdge T710 Technical Guide
Technical Specification
Dual embedded Broadcom
and load balancing (4 total ports). TOE (TCPIP Offload Engine) supported on
®
Microsoft Windows Server
®
Intel Ethernet X520 DA2 Dual-Port 10 Gigabit Server Adapter
Optional 1GBe and 10GBe add-in NICs:
®
Broadcom NetXtreme II
Network Interface Card with TOE and iSCSI Offload
®
Intel Gigabit ET Dual Port Server Adapter and Intel
Adapter
Dual Port 10GB Enhanced Intel
Future Enablement)
®
Brocade CNA dual-port adapter; Emulex
OCE10102-IX-D
Optional Add-in HBAs:
®
Brocade FC4 and 8 GB HBAs
Two redundant hot-plug 1100W
DDR3 memory; hot-plug hard
hot-plug redundant cooling;
support (4 total ports); optional PERC 6/i integrated daughtercard controller with
battery-backed cache; toolless chassis; fibre and SAS cluster support; validated for
Dell/EMC SAN
®
Integrated Matrox G200
iDRAC6 Express, optional iDRAC6 Enterprise
Dell™ OpenManage™ suite of systems management solutions
ReadyRails™ sliding rails with optional cable management arm for 4-post racks
(optional adapter brackets required for threaded hole racks)
®
NetXtreme II™ 5709c Gigabit Ethernet NIC with failover
®
2003, SP1 or higher with Scalable Networking Pack
®
57711 Dual Port Direct Attach 10Gb Ethernet PCI-Express
®
Ethernet Server Adapter X520-DA2 (FCoE Ready for
®
CNA iSCSI HBA stand up adapter
drives; optional hot-plug redundant power
dual embedded NICs with failover and load balancing
®
Gigabit ET Quad Port Server
supplies;
12