Advertisement
Available languages
Available languages
To Set Up
NOTE: Use 16.4 oz disposable propane cylinders only. Do not connect to bulk
propane systems. The LP-gas cylinder(s) used with catalytic heaters must be
constructed and marked in accordance with the specifications for LP-gas cylinders
of the U.S. Department of Transportation or Transport Canada, CAN/CSA B339.
Unit includes Heater
Assembly, Regulator
Assembly, and Support
Leg. Propane tank is not
included.
Attach Heater Assembly to Regulator Assembly hand tight.
Heater
Support Leg
Unhook Brace. Insert wire in
receiver hole.
Regulator
Align Support Wire with Hole.
Insert Support Wire into Hole.
CAUTION
• SERVICE SAFETY
• Keep all connections and fittings
clean. Inspect propane cylinder and
heater propane connections for
damage before attaching.
• During set up, check all connections
and fittings for leaks using soapy
water. Bubbles indicate a leak. Never
Unhook
use a flame.
Brace
Hook the Brace.
Support Brace assembled.
Hook the
Brace
5
Advertisement
