Grandstream Networks 496 User Manual page 29

HandyTone-496 User Manual
SIP Server
Outbound Proxy
SIP User ID
Authenticate ID
Authenticate
Password
Name
Use DNS SRV:
User ID is Phone
Number
SIP Registration
Unregister on
Reboot
Register Expiration This parameter allows the user to specify the time frequency (in minutes) the
Local SIP port
Local RTP port
This field contains the URI string or the IP address (and port, if different from
5060) of the SIP proxy server. e.g., the following are some valid examples:
sip.my-voip-provider.com, or sip:my-company-sip-server.com, or
192.168.1.200:5066
This field contains the URI string or the IP address (and port, if different from
5060) of the outbound proxy. If there is no outbound proxy, this field
SHOULD be left blank. If not blank, all outgoing requests will be sent to this
outbound proxy.
This field contains the user part of the SIP address for this phone. e.g., if the
SIP address is: sip:my_user_id@my_provider.com, then the SIP User ID is:
my_user_id. Please do NOT include the preceding "sip:" scheme or the host
portion of the SIP address in this field.
SIP service subscriber's Authenticate ID. Can be identical to or different from
SIP User ID.
SIP service subscriber's account password.
SIP service subscriber's name which will be used for Caller ID display.
Default is No. If set to Yes the client will use DNS SRV for server lookup.
If the HandyTone ATA has an assigned PSTN telephone number, this field
should be set to "Yes". Otherwise, set it to "No". If "Yes" is set, a
"user=phone" parameter will be attached to the "From" header in SIP request.
This parameter controls whether the HandyTone ATA needs to send
REGISTER messages to the proxy server. The default setting is "Yes".
Default is No. If set to yes, the SIP user's registration information will be
cleared on reboot.
HandyTone ATA refreshes its registration with the specified registrar. The
default interval is 60 minutes (or 1 hour). The maximum interval is 65535
minutes (about 45 days).
This parameter defines the local SIP port the HandyTone ATA will listen and
transmit. The default value for FXS port 1 is 5060. The default value for FXS
port 2 is 5062.
This parameter defines the local RTP-RTCP port pair the HandyTone ATA will
listen and transmit. It is the base RTP port for channel 0. When configured,
channel 0 will use this port _value for RTP and the port_value+1 for its RTCP;
channel 1 will use port_value+2 for RTP and port_value+3 for its RTCP. The
default value for FXS port 1 is 5004. The default value for FXS port 2 is 5008.
Grandstream Networks, Inc
29
.