Table of Contents
Advertisement
HandyTone-496 User Manual
DHCP IP Lease
120
Time:
DMZ IP:
WAN port
WAN port
WAN port
Port
WAN port
Forwarding:
WAN port
WAN port
WAN port
WAN port
End User
Password
Web Port
IP Address
DHCP hostname
DHCP domain
(in units of hours, default is 120 hours or 5 days)
0
LAN IP
0
LAN IP
0
LAN IP
0
LAN IP
0
LAN IP
0
LAN IP
0
LAN IP
0
LAN IP
Update
All Rights Reserved Grandstream Networks, Inc. 2005
This contains the password to access the Web Configuration Menu. This
field is case sensitive.
This is the device's internal HTTP server port. Default is 80.
There are 2 modes under which the HandyTone ATA can operate:
- If DHCP mode is enabled, then all the field values for the Static IP mode
are not used (even though they are still saved in the Flash memory.) The
HandyTone ATA will acquire its IP address from the first DHCP server it
discovers from the LAN it is connected.
To use the PPPoE feature the PPPoE account settings need to be set. The
HandyTone will attempt to establish a PPPoE session if any of the PPPoE
fields is set.
- If Static IP mode is enabled, then the IP address, Subnet Mask, Default
Router IP address, DNS Server 1 (primary), DNS Server 2 (secondary) fields
will need to be configured. These fields are reset to zero by default.
This option specifies the name of the client. This field is optional but may be
required by some Internet Service Providers. Default is blank.
This option specifies the domain name that client should use when resolving
hostnames via the Domain Name System. Default is blank.
Grandstream Networks, Inc
LAN port
LAN port
LAN port
LAN port
LAN port
LAN port
LAN port
LAN port
Cancel
Reboot
19
0
UDP Only
Protocol
0
UDP Only
Protocol
0
UDP Only
Protocol
0
UDP Only
Protocol
0
UDP Only
Protocol
0
UDP Only
Protocol
0
UDP Only
Protocol
0
UDP Only
Protocol
.
Advertisement
Table of Contents
