Grandstream Networks 496 User Manual page 23

HandyTone-496 User Manual
Admin Password:
Layer 3 QoS:
Layer 2 QoS: 802.1Q/VLAN Tag
STUN server is :
keep-alive interval:
Firmware Upgrade and
Provisioning: Upgrade Via
Firmware Key:
Onhook Threshold:
FXS Impedance:
Caller ID Scheme:
Onhook Voltage:
Polarity Reversal:
Reply to ICMP on WAN port:
Grandstream Device Configuration
STATUS BASIC SETTINGS ADVANCED SETTINGS FXS PORT1 FXS PORT2
Home NPA:
48
stun.mycompany.com
20
Use NAT IP:
Firmware Server Path:
Config Server Path:
Firmware File Prefix:
Config File Prefix:
Automatic Upgrade:
No
Always Check for New Firmware
Check New Firmware only when F/W pre/suffix changes
800 ms
600 Ohm (North America)
Bellcore (North America)
36V
No
time.nist.gov
NTP Server:
No
(purposely not displayed for security protection)
(Diff-Serv or Precedence value)
0
802.1p priority value
(URI or IP:port)
(in seconds, default 20 seconds)
(used in SIP/SDP message if specified)
TFTP
192.168.1.193
192.168.1.193
Yes, check for upgrade every
Yes (reverse polarity upon call establishment and termination)
(URI or IP address)
Yes (Unit will not respond to PING from WAN side if set to No)
23
Grandstream Networks, Inc
0
HTTP
Firmware File Postfix:
Config File Postfix:
10080
minutes (default 7 days)
(in Hexadecimal Representation)
.
(0-7)