Table of Contents
Advertisement
Make calls from the group list
A group has a set of pre-arranged members and a unique
group ID. A group PTT call is similar to a one-to-many PTT
call.
1.
To access the group list select
2.
Scroll to a group and press the
played on the screen.
3.
When any member from the
group responds, the contact
name is displayed with a green
icon beside it. If a member has
not accepted the call a red icon
is displayed beside the contact
name. You can begin speaking
after the beep.
Group
session,
Start sending, Speaking
is dis-
played at the top of the
screen. When you are speaking a list of all the partici-
pants in the session is displayed on the screen.
4.
Continue to hold the
PTT
key while you are speaking
and release the key when you finish speaking.
5.
If any member takes floor control,
ten
is displayed at the top of the screen.
Menu
>
PTT
> Group.
PTT
key,
Ringing
is dis-
Start receiving, Lis-
6.
During the session the status of
all the members in the group is
displayed on the screen. The
name of the person speaking is
highlighted in the displayed list
of participants.
7.
To add more members to the
group select Add, use the
Menu
key to select more mem-
bers and select OK.
Add user to
session
is displayed at the top of the screen.
8.
As the initiator, if you press the button
group session closes and all members get discon-
nected from the session.
9.
Press the button
to end the call.
Make unplanned group calls
Unplanned or ad hoc groups are created on the spur of the
moment and do not have pre-arranged set of members or a
specified group ID.
1.
To make an ad hoc group call, press the
list of Contacts appears.
2.
Use the
Menu
key as a toggle key to select or clear
the checkbox against the contacts you want to call.
3.
Press the
PTT
key to initiate the call
tion. Start
sending,
Speaking
the screen.
49
, the
PTT
key, the
Ad-hoc PTT invita-
is displayed at the top of
Advertisement
Table of Contents
