Features of your vehicle
3. Pull the support rod from the bonnet.
4. Hold the bonnet open with the support
rod.
4
16
D090200APA-UK
1. Before closing the bonnet, check the
following:
• All filler caps in engine compartment
must be correctly installed.
• Gloves, rags or any other com-
bustible material must be removed
from the engine compartment.
2. Return the support rod to its clip to
prevent it from rattling.
3. Lower the bonnet until it is about 1 ft.
OPA047016
(30 cm) above the closed position and
let it drop. Make sure that it locks into
place.