Aligning The Print Head - Canon MP480 series On-Screen Manual

Aligning the Print Head

> Routine Maintenance
Contents
Aligning the Print Head
If printed ruled lines are misaligned or print results are otherwise unsatisfactory, adjust the print head
position.
You need to prepare: 2 sheets of A4 or Letter-sized plain paper
1.
Make sure that the power is turned on, and load 2 sheets of A4 or Letter-sized plain
paper in the Rear Tray.
2.
Open the Paper Output Tray gently, and open the Output Tray Extension.
3.
Print the print head alignment pattern.
Press the Menu button.
(1)
Select Maintenance, and press the
(2)
Select Print head alignment, and press the OK button.
(3)
Note
To print the current head position adjustment values, select Head alignment print in the
Maintenance menu and press the
Screen .
Select Yes, and press the OK button.
(4)
The print head alignment sheet will be printed.
Check the pattern is printed correctly, select Yes, then press the OK button.
(5)
Confirm the displayed message and press the OK button.
(6)
The Print head alignment screen appears.
4.
Adjust the print head position.
Check the printed patterns, and use the
(1)
the number of the pattern that has the least noticeable streaks for column A.
>
When Printing Becomes Faint or Colors Are Incorrect
button.
OK
OK
button. See
Advanced Guide
> Aligning the Print Head
Selecting Menus on the Top Menu
(Left) or (Right) button to select
Page 74 of 681 pages
Troubleshooting