Adjusting Cropping Frames - Canon MP480 series On-Screen Manual

Adjusting Cropping Frames

>
Advanced Guide Scanning
Adjusting Cropping Frames
Adjusting Cropping Frames
You can specify the scan area by creating a cropping frame on the image displayed in the Preview area.
When you click Scan, only the portion within the cropping frame will be scanned and passed to the
application.
You can create two or more cropping frames. When you click Scan, all cropping frames will be scanned.
(Scan is repeated for each cropping frame.)
Important
You cannot create additional cropping frames when you used Multi-Crop in ScanGear's Advanced
Mode.
Cropping frame types
(1) Focus Cropping Frame (rotating thick broken lines)
The settings in Basic Mode or Advanced Mode will be applied.
(2) Selected Cropping Frame (stationary thick broken lines)
The settings will be applied to the Focus Cropping Frame and Selected Cropping Frames
simultaneously. You can select multiple cropping frames by clicking them while pressing the Ctrl key.
(3) Unselected Cropping Frame (stationary thin broken lines)
The settings will not be applied.
Initial cropping frame
A cropping frame (Focus Cropping Frame) is displayed automatically around the preview image
according to the document size. You can also create a cropping frame by dragging the mouse in the
Preview area.
Adjusting a cropping frame
The cursor will change into
the mouse in the direction of the arrow, the cropping frame will expand or contract accordingly.
The cursor will change into
to move the entire cropping frame.
You can rotate a cropping frame 90 degrees by clicking
Aspect Ratio) is not available when Output Size is Flexible.
>
Scanning with Other Application Software
when it is positioned over a cropping frame. If you click and drag
when it is positioned within a cropping frame. Click and drag the mouse
>
Appendix: Useful Information on Scanning
(Switch Aspect Ratio). However,
Page 496 of 681 pages
>
(Switch