Fine Cartridge Holder Does Not Move To The Position For Replacing - Canon MP480 series On-Screen Manual

FINE Cartridge Holder Does Not Move to the Position for Replacing

>
Advanced Guide Troubleshooting
FINE Cartridge Holder Does Not Move to the Position for
Replacing
Check 1: Is the Power lamp off?
Check if the Power lamp is lit green.
The FINE Cartridge Holder will not move unless the power is on. If the Power lamp is off, close the
Scanning Unit (Cover) and turn the machine on.
While the Power lamp is flashing green, the machine is initializing. Wait until the Power
flashing and remains lit green, and then open the Scanning Unit (Cover) again.
Check 2: Is an error message displayed on the LCD?
Close the Scanning Unit (Cover), confirm the number of times the Alarm lamp is flashing, take the
appropriate action to resolve the error, and then reopen it. For details on how to resolve the error,
see An Error Message Is Displayed on the LCD
Check 3: Has the Scanning Unit (Cover) been left open for 10 minutes or
longer?
If the Scanning Unit (Cover) is left open for more than 10 minutes, the FINE Cartridge Holder moves
to the right to prevent the Print Head from drying out. Close and reopen the Scanning Unit (Cover) to
return the FINE Cartridge Holder to the left.
Check 4: Has the machine been printing continuously for a long
period?
Close the Scanning Unit (Cover), wait a while, then reopen it.
If the machine has been printing continuously for a long time, the Print Head will overheat, and the
machine stops printing temporarily to protect the Print Head.
Note
Opening the Scanning Unit (Cover) while printing moves the FINE Cartridge Holder to the right.
Close the Scanning Unit (Cover), and reopen it after printing is complete.
> FINE Cartridge Holder Does Not Move to the Position for Replacing
.
Page 609 of 681 pages
lamp stops
Page top