Canon MP480 series On-Screen Manual page 570

Changing the Machine Settings on the LCD
Corrects red eyes in portraits caused by flash photography.
7.
Face brightener
Brightens a darkened face on a photo taken against the light.
Date display
Changes the display format of shooting dates when printed.
Note
When Date printing ON in the Tab 1 on the Memory card settings screen, the shooting date is
printed in the date display format you selected. For Print settings, see
The shooting date format is as specified in the DPOF setting from DPOF printing.
Read/write attribute
Selects whether to allow data to be written onto memory cards from a computer.
Important
Remove the memory card before changing this setting. For details, see
Slot as the Memory Card Drive of the Computer
If you set this setting to Writable from PC, card direct printing cannot be done. After you finish
operation of the memory card dedicated drive, be sure to set it back to Not writable from PC.
Quiet mode
Enables this function on the machine if you want to reduce the operating noise, such as when
printing at night.
Enabling this function reduces the noises generated while:
Copying,
Printing from a memory card,
Printing from a PictBridge compliant device,
Printing from a wireless communication device, and
Printing a template form.
Important
Printing speed may be reduced compared to when this setting is set to Disable.
This function may not be so effective depending on the print quality setting. Furthermore,
certain noise, such as when the machine is preparing for printing, is not reduced.
Note
The noises generated while scanning or printing from the computer can also be reduced. To
reduce these noises, you need to configure the settings on the computer.
For the noises while scanning, refer to
For the noises while printing from the computer, refer to
Key repeat
Enables/Disables continuous input by pressing and holding down the
when setting the number of copies, the zoom ratio, etc.
Language selection
Changes the language for LCD messages and menus.
Reset setting
You can change the settings back to the default, except for the LCD language and the current
position of the Print Head.
.
.
Scanner Tab
Reducing the Machine Noise
Page 570 of 681 pages
.
Setting Items
Setting Up the Card
.
, , , or
button
Page top