Adding Pci Add-On Cards - Supero SUPERSERVER 7047R-3RF4+ User Manual

S S
UPER ERVER 7047R-3RF4+ User's Manual
5-7

Adding PCI Add-On Cards

The 7047R-3RF4+ can accommodate up to six full-length, low-profi le PCI add-on
cards (four x16 cards, one x8 card and one x4 card in a x8 slot).
Installing an Add-on Card
1. Begin by removing the shield for the PCI slot you wish to populate.
2. Fully seat the card into the slot, pushing down with your thumbs evenly on
both sides of the card.
3. Finish by using a screw to secure the top of the card shield to the chassis.
The PCI slot shields protect the serverboard and its components from EMI
and aid in proper ventilation, so make sure there is always a shield covering
each unused slot.
5-12