Adding Pci Add-On Cards - Supero SUPERSERVER User Manual

S S
UPER ERVER 1027R-73DARF User's Manual
5-6

Adding PCI Add-On Cards

The 1027R-73DARF can accommodate one standard-size PCI-E 3.0 x8 add-on
(expansion) cards.
Installing an Add-on Card
1. Begin by removing the shield where the riser card is located.
2. Fully seat the card into the slot on the riser, pushing down with your thumbs
evenly on both sides of the card.
3. The PCI slot shields protect the serverboard and its components from EMI
and aid in proper ventilation, so make sure there is always a shield covering
each unused slot.
5-12