Serverboard Features; Processors; Memory; Sas - Supero SUPERSERVER 7047R-3RF4+ User Manual

S S
UPER ERVER 7047R-3RF4+ User's Manual
1-2

Serverboard Features

The SuperServer 7047R-3RF4+ is built around the X9DR3-LN4F+, a dual processor
serverboard based on the Intel C600 chipset and designed to provide maximum
performance. Below are the main features of the X9DR3-LN4F+. (See Figure 1-1
for a block diagram of the chipset).

Processors

The X9DR3-LN4F+ supports single or dual Intel® Xeon E5-2600 Series processors.
Please refer to the serverboard description pages on our web site for a complete
listing of supported processors (www.supermicro.com).

Memory

The X9DR3-LN4F+ has 24 DIMM slots that can support up to 768 GB of ECC reg-
istered DDR3-1333/1066/800 SDRAM. Both 1.5V and 1.35V DIMMs are supported.
Use of DDR3-1600 depends on memory confi guration. See Chapter 5 for details.

SAS

A total of eight SAS ports are provided onboard, which are RAID 0, 1 and 10 capable.
Note: The operating system you use must have RAID support to enable the hot-
swap capability and RAID function of the SAS drives.

Serial ATA

A SATA controller is also integrated into the chipset to provide two SATA 3 (6/Gbps)
and four SATA 2 (3 Gbps) ports, which are RAID 0, 1, 5 and 10 supported. The
SATA drives are hot-swappable units. RAID 5 supported with Windows OS only).
Note: The operating system you use must have RAID support to enable the hot-
swap capability and RAID function of the SATA drives.

PCI Expansion Slots

The X9DR3-LN4F+ has four PCI-E 3.0 x16 slots, one PCI-E 3.0 x8 slot and one
PCI-E 3.0 x4 (in a x8) slot.
1-2