Making The Basic Connections - DirecTV H23 User Manual

Making the Basic Connections

1) Connect DIRECTV HD Receiver to Satellite Dish. Connect the RG-6 RF coaxial cable from
your satellite dish to the jack labeled SATELLITE IN on the DIRECTV HD Receiver. If your
installation includes an SWM (Single Wire Multiswitch), you should connect the RG-6 RF
coaxial cable from your SWM to the SATELLITE IN jack. Some systems may instead make
this connection to a cable entry point in your house. Your DIRECTV installer will make the
appropriate connection.
2) Connect DIRECTV HD Receiver to Telephone Line. Plug one end of the telephone cord into
a phone jack on your wall (or into a phone splitter that is plugged into a phone jack) and the other
end into the PHONE JACK on the back of the DIRECTV HD Receiver.
3) Plug all power cords into electrical sockets.
66
You're almost
done!