Olivetti PG L2130 Operation Manual page 82

Indicator
5-8
Maintenance Indication
The table below shows the indicator combinations when user
intervention is required. It is assumed that the printer is online and is
processing data.
Meaning
There is no paper in the cassette,
MP tray.
The cassette is not inserted
properly.
The top cover is open.
There is no cassette in the paper
feeder or the cassette specified as
a paper supply is not inserted
properly.
The developer unit or toner
container is not installed.
The cassette does not contain the
paper specified by the printer
driver.
The paper sizes do not match.
Remedy
Load paper into the paper source.
Insert the cassette fully into the printer.
Close the cover.
Re-insert the cassette and then try
printing again.
Install the developer unit or toner
container.
Load the paper into the cassette (#[1 or
2]) and then restart printing. You can
change the paper source by pressing
the [GO].
If the paper size in the paper source
differs from the paper size and type
specified by the printer driver, you can
print by supplying paper from the MP
tray. Load the correct paper size and
type into the MP tray and press [GO] to
begin printing.
If you want to supply paper from a
source other than the MP tray, you can
change the paper source by pressing
[GO].
If the paper fed from the MP tray is a
different size from the specified paper
size, a paper jam will occur.
Troubleshooting