Model Name And Bios Version - AOpen DXPS Easy Installation Manual

15. Support the 2
This motherboard provides two USB
keyboard, modem, printer, etc. There are two connectors on the PC99 back panel. You
can use proper cable to connect other USB connectors to the back panel or front panel of
chassis.
1 2
2
USBPWR0
USBPWR0
USB_FP_P0- USB_FP_P1-
USB_FP_P0+
USB_FP_P1+
GND GND
KEY NC
16. Power-On and Load BIOS Setup
After you finish the setting of jumpers and connect correct cables. Power on and
enter the BIOS Setup, press <Del> during POST (Power On Self Test). Choose
"Load Default Setting" for recommended optimal performance.
Del
nd
USB1.1 Channel
channels to link USB devices, such as mouse,
17. Comparison Table
The comparison table below will show the differences between DXPS series
motherboards.
Compare/Model Key Chip (North Bridge)
DXPS Server Works
GC-SL(FSB:400MHz)
DXPS Plus Server Works
GC-SL(FSB:400MHz)
(With SCSI)
DXPS-U Server Works
GC-SL(FSB:533MHz)
DXPS Plus-U Server Works
GC-SL(FSB:533MHz)
(With SCSI)

18.Model name and BIOS version

Model name and BIOS version can be found on upper left corner of first boot screen
(POST screen). For example:
DXPS R1.00 Sep. 10. 2002 AOpen Inc.
DXPS is the model name of the motherboard; R1.00 is BIOS version
CPU Support (Dual CPU)
Support Intel Xeon 1.8 GHz
above (FSB:400MHz)
Support Intel Xeon 1.8 GHz
above (FSB:400MHz)
Support Intel Xeon 1.8 GHz
above (FSB:400/533MHz)
Support Intel Xeon 1.8 GHz
above (FSB:400/533MHz)