Graco Optimiser 02017 Instructions Manual page 5

CHART 1: GUN ASSEMBLIES, Series B (continued)
Optional Non-HVLP Compliant Gun Assemblies
With standard needle and nozzle and optional high pressure air cap
Includes:
Optional
Complete Needle
Gun Assy. Assy.
Part No. P/N
236–023 238–217
236–024 238–218
* Maximum recommended torque to install molded fluid nozzle in the spray gun is 35 in-lbs (4 N m).
See atomizing air pressure chart on page 7.
CHART 2: NEEDLE/NOZZLE/AIR CAP KITS
Standard Needle/Nozzle/Air Cap Kits
Includes:
Standard Standard
Needle/
Needle
Nozzle/Air
Assy.
Cap Kit
P/N
Part No.
238–233 238–217
238–234 238–218
238–235 238–219
238–236 238–220
See page 6 for needle assembly replacement tips.
Optional Needle/Nozzle/Air Cap Kits – available as "Build to Order"
Optional Includes:
Needle/ Needle/
Nozzle/Air Needle
Cap Kit Assy.
Part No.
P/N
235–306 238–703
235–307 238–703
235–308 238–703
* Maximum recommended torque to install molded fluid nozzle in the spray gun is 35 in-lbs (4 N m).
See page 6 for needle assembly replacement tips.
Selection Charts
High
* Pressure
Nozzle
Air Cap
P/N
P/N
276–293 189–755
276–294 189–755
*
Nozzle Air Cap
P/N P/N
276–293 188–754
276–294 188–754
276–295 188–755
276–296 188–756
*
Nozzle Air Cap
P/N P/N
276–290 188–754
276–291 188–754
276–292 188–754
Orifice Size
0.042" (1.067 mm) Light to Medium Fluids or Low Fluid Flow
[5–8 oz./min. (0.15–0.24 l/min.)]
0.055" (1.397 mm) Light to Medium Fluids or Medium Fluid
Flow [6–12 oz./min. (0.18–0.36 l/min.)]
Orifice Size
0.042" (1.067 mm)
0.055" (1.397 mm)
0.070" (1.778 mm)
0.086" (2.184 mm)
Orifice Size
0.020" (0.508 mm)
0.026" (0.660 mm)
0.030" (0.762 mm)
Material Usage
(See TERMS on page 4)
308–293 5