Graco GH 311797J Repair Manual page 19

CAUTION
Support pump with your hand before opening t-handle.
8 (Fig. 18) Open clamp (247).
F . 17
IG
9 (Fig. 19) Remove pump (111) from unit.
F . 18
IG
311797J
ti8833a
111
ti8832a
Installation
1 (Fig. 20) If needed, place pump rod in adjustment casting
and pull pump to lengthen rod.
ti8834a
F . 19
IG
2 (Fig. 21) Install pump (111) in sprayer.
F . 20
IG
3 (Fig. 22) Close clamp (247) around pump (111) and push
it closed.
Adjustment hole
F . 21
IG
NOTE: Closing force on T-handle can be adjusted if needed by
inserting pin into adjustment hole and turning.
Displacement Pump ProConnect
111
ti8959a
ti8958a
247
19