Section 3: Installing The Radio System Batteries; Section 4: Installing The Wing - Pro Boat G26 Owner's Manual

Section 3: Installing the Radio System Batteries (cont.)
Reinstall the battery holder into the radio compartment.
Secure the radio box cover with the 6 Phillips screws.
Transmitter Batteries
Remove the transmitter from the box.
Remove the battery cover on the bottom of the transmitter.
Insert 8 "AA" alkaline batteries into the battery holder.
Note proper polarity.
Turn on the transmitter and confirm that the LCD illuminates,
indicating proper installation of fully charged batteries.
Turn on the receiver switch and move the controls. Confirm that
all controls operate in the proper direction and are controlled by
the proper transmitter input.
Turn the transmitter and the receiver switch off. To keep the boat
from receiving stray signals, the transmitter should be turned on
first, followed by the receiver. Likewise, the receiver should be
turned off first, then the transmitter.
Install the wing in the direction shown.
Install the four 3mm x 20mm hex head screws and secure with
the four 3mm nuts.
Apply screw-locking compound to the threads to lock the nuts
in place.
NOTE: The wing is not intended to be a handle.

Section 4: Installing the Wing

7