Table of Contents
Advertisement
What's in this Guide?
Call settings
The Call settings let you define whether your EX90
shall respond automatically to incoming calls or not.
If you set it to Auto answer On, you may specify a
delay from the moment an incoming call appears
until the unit responds. The delay can be set to 0–50
seconds in one-second steps.
You may also specify:
•
Maximum outgoing and incoming bandwidth.
The two may have different settings.
•
A preferred default call rate different from the
one the unit comes with, if needed.
•
The default call protocol, choose between SIP
and H.323.
Bandwidth and call rates can be set to 128, 384, 512,
768, 1152, 1920, 2560, 3072, 4000 or 6000 kbps.
D 14724.02 TANDBERG EX90 User Guide (TC3.1) June 2010
Introduction
Connecting EX90
Using EX90
27
The Settings
Web interface
Advertisement
Table of Contents
