Printinq reporls
r Printing error transmission reports
The fax can automatically print an error transmission
repolt '[ it fails:o serrd.a -i:cument because the other
party did not answer or an error occurred. An error
transmission report tells you the facsimile number of
the party you are sending to so you can try again later.
Follow this procedure to have the fax print out a error
transmission report every time an error occurs. When
an error or other problems occur, the fax displays an
error message in the one-line display. For a list of
these errors, their cause, and a list of ways to solve the
problems that cause errors see page 1 16.
Make sure that the REG/SIRAI/ON switch is ON before you
register. Turn it OFF after you complete registration.
1 Press trnxerroTl.
1 .
D I A I .
S E T U P
2 Press O.
3 .
U S E R S W
3 Press fsEr-I.
TX
REPORT
4 Pr e ss t he sear ch keys ( . ') to display ERRoR
TX REPORT.
ERROR TX REPORT
5 Press tsEr-].
O U T P U T
1 ' t o