ATEN CS1792 User Manual page 38

CS1792 / CS1794 User Manual
5. If you enabled Check Firmware Version, the Utility compares the device's
firmware level with that of the upgrade files. If it finds that the device's
version is higher than the upgrade version, it brings up a dialog box
informing you of the situation and gives you the option to Continue or
Cancel.
If you didn't enable Check Firmware Version, the Utility installs the
upgrade files without checking whether they are a higher level, or not.
As the Upgrade proceeds, status messages appear in the Status Messages
panel, and the progress toward completion is shown on the Progress bar.
30
The firmware [Ver 1.0.] is not newer than the current firmware
[Ver 1.0.090] in device CS1792/94 [MAIN]: 000
Continue the upgrade? [Yes/No]