Custom Search; Change Direction Or Resume Search; Select Custom Search Bands; Holding - Uniden BCD436HP Owner's Manual

Custom searCh

Range number
currently being
Allows you to search the scanners 10 programmed frequency ranges.
See also Edit Custom Search.
Press Menu. Scroll to Search for... and press E/yes.
Scroll to Custom Search and press E/yes.
See also Set Search Key.

Change Direction or Resume Search

Turn the Scroll Control.

Select Custom Search Bands

Press the number keys to enable or disable each Custom Search band.

Holding

Frequency Hold. Press Channel to hold on a Frequency.
Scroll to frequencies. Press Channel to release hold.

Avoiding Frequencies

Temporary Avoids cancel when you cycle power.
Frequency Avoid - Press Avoid once to Temporary Avoid.
Press quickly to toggle Permanent Avoid and Stop Avoiding when the the scanner
stays in a frequency or in Search Hold mode.
Review Avoids - Press Channel to hold on any Frequency.
Press Func then Avoid. Scroll to each frequency and press E/yes to Stop Avoiding.
Temporary Avoids appear reversed -
Stop All Avoiding - Press Channel to hold on any Frequency.
Press and hold Avoid. The scanner displays Search Frequencies All Unavoided.
See also Freq Avoids.

Attenuation

Band Attenuation. Press Func then 4(ATT) for each band.
Global Attenuation. Press Channel to hold on any frequency then press and hold Func
then 4(ATT) to toggle global attenuation.

Modulation

Press Func then Channel(MOD) for each band.
Search range
searched
name
Searching
Direction
T
.
67