Uniden BCD436HP Owner's Manual page 37

displays to show Function mode .
F0-9 indicates the first digit of the Favorites list quick key on the left with the blinking
second digit on the right in scan mode .
a non-blinking number on the right indicates the quick key is enabled waiting to be
scanned .
a - (dash) means nothing is assign to the quick key .
an * (asterisk) means the quick key is disabled .
siTe hold displays in site hold mode .
searCh displays in search mode .
Time displays the time .
↑ or ↓
displays to show the scan or search direction .
GPs displays when connected to a GPs unit .
reC displays when recording .
displays to show Wi-Fi status is not connected . (BCd536hP only)
displays to show Wi-Fi status is connected . (BCd536hP only)
aP displays when connected in access Point mode . (BCd536hP only)
displays to show the signal strength .
displays in Priority mode .
displays in reverse in Priority dnd mode .
displays and blinks if the battery is low . (BCd436hP only)
displays if the Close Call Priority feature is on .
displays in reverse in Close Call dnd mode .
s=nn displays the squelch level for three seconds when you turn sQ .
Battery level displays when you press Vol . (BCd436hP only)
Volume and Squelch
29