Uniden BCD436HP Owner's Manual page 38

s0-9 display the first digit of the current system quick key on the left with the blinking
second digit on the right .
a non-blinking number on the right indicates the quick key is enabled waiting to be
scanned .
a - (dash) means nothing is assigned to the quick key .
an * (asterisk) means the quick key is disabled .
0-9 displays the Custom search key status in search
date displays the date .
Receive
receive mode in Function mode .
Mode
Volume
Volume offset for the channel in Function mode .
Offset
IFX
displays if intermediate exchange is enabled for the channel .
aTT displays to show channel attenuation in receiving/hold modes and in search mode
to show search attenuation .
aTT blinks to indicate global attenuation .
P25 displays if the channel is receiving digitalized voice in receiving or hold modes .
lnK displays when data is received on a voice channel in receiving or hold modes .
daT displays when data is received on a control channel in receiving or hold modes .
enC displays if the channel is receiving encrypted voice and is muted in receiving or
hold modes .
Wx displays if the Weather alert Priority feature is on .
displays the volume level for three seconds when you turn vol .
V=nn
system name displays in receiving/hold modes .
avoid/hold Temporary avoids appear reversed -
search with displays to show a custom search in scan mode .
scan
Custom search displays in search mode .
name
department status displays in receiving/hold modes .
name Temporary avoids appear reversed -
avoid/hold displays for a conventional system in scan mode .
displays for a system in receiving/hold modes .
Custom search displays in search with scan mode .
name
site name displays for a trunked system in scan mode .
department displays the department name .
name
search displays in search mode .
Frequency
Modulation displays in search mode .
scanning displays for a conventional system in scan mode .
30
mode .
.
.