Setting Up Your Scanner; Turn On The Scanner - Uniden BCD436HP Owner's Manual

settInG up Your sCanner

turn on the sCanner

Func
Menu
BCd436hP
For Model Number
BCd436hP
BCd536hP
The first time you turn on your scanner it will prompt you to set the clock. See Setting the Clock.
To begin scanning right away, press the Zip button to select your country and zip/postal code (See
Data Naming to enter postcode). The scanner will load channels for your area from the database
and start scanning.
18
Scroll
Control
1. Press and hold
2. If the screen is too dark, tap
3. Press the scroll control to display the volume level. Turn the
scroll control (within 10 seconds) to adjust the volume.
4. Press the scroll control again to close the volume level (or let
it disappear after 10 seconds).
5. Press Func then press the scroll control to display the
squelch level. Turn the scroll control counter-clockwise all
the way then clockwise until the noise stops, then one notch
more.
6. Press the scroll control again to close the squelch level.
1. Rotate VOL clockwise and set the volume to around 10
o'clock.
2. Rotate the SQ knob counter-clockwise all the way, and then
rotate the VOL knob to find a comfortable volume level.
Rotate the SQ clockwise until the noise stops, then one notch
more.
BCD536HP
Procedure
for about 2 seconds.
to turn on the backlight.
Squelch
Volume