Selecting Another Track; Repeating The Current Track; Searching For A Passage Within A Track - Grundig RRCD 3720 DEC User Manual

CD MODE
2

Repeating the current track

1

Selecting another track

1

Searching for a passage within a track

1
Selecting folders and tracks (only MP3/WMA)
1
2
Repeating a track (Repeat 1)
1
2
Repeating all the tracks of a folder (Repeat Folder)
(MP3/WMA only)
1
2
38
________________________________________________________
Press » II« to resume playback.
Note:
Playback also resumes at the beginning of the same track if you switch from CD mode
to another input source and then back to CD mode or if you switch to CD mode again
from standby.
Briefly press » « during playback.
8
– The track is repeated from the beginning.
During playback, keep pressing »
hear appears in the display.
– Playback of the selected track starts automatically.
During playback, press »
– If » 8 « or » 9 « are released, playback starts.
Note:
During the search, the volume is reduced in CD-DA mode; in MP3 mode the search starts
with a delay.
During playback, select the album with »
Press » « or » « to select the track.
8 9
– Playback of the track starts automatically after a short time.
Note:
The root folder is shown as number 1. However, you can only select a folder if it actually
contains MP3/WMA files.
Press »REP./INTRO« once during playback.
–The current track is repeated.
To quit the function, press »REP./INTRO« repeatedly until the repeat indicator
(»REPEAT«) goes out.
Press »REP./INTRO« twice during playback.
– All the tracks on the current folder are played back repeatedly.
To quit the function, press »REP./INTRO« repeatedly until the repeat indicator
(»REPEAT«) goes out.
8 « or » 9
« or » « and hold it down until you have found the passage.
8 9
« until the number of the track you want to
« or » «.