Radio Mode - Grundig RRCD 3720 DEC User Manual

RADIO MODE

Storing stations as presets
Up to 20 stations in the FM band and up to 20 stations in the MW band can be stored as
presets.
1
2
3
4
5
6
Selecting a preset
1
2
Stereo/mono reception
If the device receives an FM stereo station, »STEREO« lights up in the display. However, if
the signal from the FM stereo station is weak, you can improve the sound quality by switching
to mono reception.
1
2
36
Press »FUNCTION« to select the frequency band (FM or MW).
– Display: »FM« or »MW«.
Select the station with »
Press »PROG./RAND.« briefly to activate the memory function.
– Display: »00« and »PROGRAM«flash for approx. 10 seconds.
Press » « or »
To store the station, press »PROG./RAND.« again.
– Display: e.g. »10« and »PROGRAM«.
To store more stations, repeat steps
Press »FUNCTION« to select the frequency band (FM or MW).
Press » « or »
– Display: e.g. »7« and the frequency.
Switch to mono reception with
– Display: »STEREO« appears.
Switch to mono reception with
– Display: »STEREO«.
Note:
The stereo or mono settings can also be transferred on the preset when storing radio
stations.
_________________________________________________
« or » «.
8 9
« to select the preset.
to 5.
2
« to move up and down presets one at a time.
»FM MODE
7
»FM MODE
7
« (briefly »MONO«).
« (briefly »STEREO«).