Top Of Unit - Grundig YACHT BOY 400 User Manual

Your Unit at a Glance
MEMO For calling up the memory positions (as with ME-
MO ).
Press once: Next lower memory position.
Press and keep pressed longer than 1 s: Automatic
memory position selection in descending order.
The automatic memory position select function stops
for approx. 5 seconds on each memory position so
that the station received on it can be checked. A fur-
ther pressure on the MEMO
this function.
TUNING / For manual step-by-step tuning in direction of
higher or lower frequencies.
Keep button pressed: Frequency scan up or down.
STEP For selecting the manual tuning steps (the respective
waveband must have been selected).
LW 1 kHz or 9 kHz
SW 1 kHz or 5 kHz
MW 1 kHz or 9 kHz resp. 10 kHz
For selecting the tuning step 9 kHz or 10 kHz in the
MW band, the unit must be switched off with the
¢ ON/OFF button.
AUTO TUNING Automatic station tuning
Press briefly: Automatic station tuning in direction of
higher frequencies.
Keep pressed longer then 0.5 s: Automatic station
tuning in direction of lower frequencies.

Top of Unit

SNOOZE
button will terminate
LIGHT
8
Telescopic aerial
for FM and SW reception.
Snooze button
Press once to switch off the radio or the alarm func-
tion after wake-up. After five minutes, the wake-up
function will be repeated (sound signal or radio).
Keep pressed the button longer than 2 seconds to
switch off the wake-up function. The function will be
retained for the following day(s).
If the SNOOZE button is not pressed, the sound signal
will sound for 5 minutes or the radio play for 60 minu-
tes. After that, the respective function will be switched
off.
Display illumination
Press this button to illuminate the display. After 10
seconds, the illumination will automatically be swit-
ched off.
The duration of the display illumination will be increa-
sed if any other button will be pressed within this
10-seconds period.
A pressure on the ¢ LIGHT button will immediately
switch off the display illumination.