Playback; Searching For A Desired Song; Quick Search - Alpine CDE-103BT Owner's Manual

Playback
1
Press SOURCE/<!> to switch to the iPod mode.
TUNER
~
DISC
~
USB AUDIO
~
iPod,IIAUX+,2
~
AUX']
~
TUNER
,I
Displayed only when the iPhoneliPod is connected and
AUX+ SETUP is set to OFF, refer to "Setting the AUX+ SETUP
Mode" (page 17).
,2
Displayed only when the AUX
+
SETUP is set to ON, refer to "Setting
the AUX+ SETUP Mode" (page 17).
,] Refer to "Using the Front AUX Input Terminal" (page 15).
2
Press
~
or
~
to select the desired song.
Return to the beginning of the current song:
Press
~.
Fast backward through current song:
Press and hold
~.
Advance to the beginning of the next song:
Press
~.
Fast forward through current song:
Press and hold
~.
3
To pause playback, press
~/II/ENT.
Pressing
~/II
lENT again will resume playback.
• A song playing on the iPhoneliPod while it is connected to this unit
will continue to play from where it was paused after disconnection.
• 1fyou listen to an episode from a selected podcast or audiobook, the
episode can be changed by pressing 1 .... or ~ 2.
• An episode may have several chapters, the chapter can be changed
by pressing
~
or
~.
Searching for a desired Song
An iPhone/iPod can contain hundreds of songs. By using file tag
information and keeping these songs organized in playlists, this unit's
search functions will ease song searches.
Each music category has its own individual hierarchy. Use the Playlist!
Artist!Al bum/Song/Podcast!Genre/ComposerlAudiobook search mode
to narrow searches based on the table below.
Hierarchy 1 Hierarchy 2 Hierarchy 3
Hierarchy 4
Playlist Song - -
Artist' Album' Song -
Album' Song -
-
Song - - -
Podcast Episode - -
Genre' Artist' Album' Song
Composer' Album' Song -
Audiobook
- -
-
For example: Searching by Artist name
The following example explains how an ARTIST search is performed.
Another search mode can be used for the same operation, although the
hierarchy differs.
1
Press
~/ESC
to activate the search selection mode.
The
"~"
indicator lights up.
2
Turn the Rotary encoder to select the ARTIST
search mode, and then press
~/II/ENT.
PLAYLIST
H
ARTIST
H
ALBUM
H
SONG
H
PODCAST
H
GENRE
H
COMPOSER
H
AUDIOBOOK
H
PLAYLIST
3
Turn the Rotary encoder to select the desired
Artist, and then press ~/II/ENT.
4
Turn the Rotary encoder to select the desired
Album, and then press
~/II/ENT.
5
Turn the Rotary encoder to select the desired
Song, and then press
~/II/ENT.
• After pressing and holding
~/IIIENT
for at least 2 seconds while
in each hierarchy (except SONG and AUDIOBOOK hierarchy), all
songs ofthe selected hierarchy are played back.
• After selecting [ALL} in the search mode with'" ", press and hold
~/IIIENT
for at least 2 seconds to play back all songs in the
iPhoneliPod or selected search mode.
• While in the search mode,
if
you press and hold ~IESC for
2 seconds, or no operation is performedfor 10 seconds, the search
mode is canceled.
• 1n the search mode, pressing
~IMUTE
will return to the previous
mode.
• When search is made during M.1.X. play, the M.J.X. play mode will be
canceled.
• "NO SONG" will be displayed
if
there are no songs in the selected
playlist in the PLA YLIST search mode.
• "NO PODCAST" will be displayed
if
there is no podcast data in the
iPhoneliPod in the PODCAST search mode.
• "NOAUDIOBOK" will be displayed
if
there is no audiobook data in
the iPhoneliPod in the AUDIOBOOK search mode.
• 1f "iPod name" stored in the iPhoneliPod is selected in the desired
Playlist search mode, and ~/IIIENT is pressed, you can search for
all songs in the iPhoneliPod. Also,
if
you press and hold
~/IIIENT
for at least
2
seconds, all songs in the iPhoneliPod are played back.
• Depending on the iPhoneliPod, podcast search is not supported.
• if
anyone ofthe preset buttons (1 through
6) is pressed in the search
mode, a search can be made quickly by skipping to the specified
location. For details, refer to "Direct Search Function" on page 24.
Quick Search
You can search a song from all songs in the iPhone/iPod without
selecting an album, artist, etc.
1
Press and hold
~/ESC
for at least 2 seconds to
activate the Quick Search mode.
The
"~"
indicator lights up.
2
Turn the Rotary encoder to select a desired song.
The selected song is played back immediately.
• Press and hold
~/ESC
for at least 2 seconds in the search mode to
cancel. Or, the search mode
is
canceled
if
no operation
is
performed
for 10 seconds.
• if
many songs are in the iPhoneliPod, it takes time to searchfor
songs.
• if
anyone ofthe preset buttons (l through 6) is pressed in the search
mode, a search can be made quickly by skipping
10
the specified
location. For details, refer
10
"Direct Search Function" on page 24.
• This function is inactive during repeat
(r:=J)
playback.
23-EN