Automatic Memory Of Station Presets - Alpine CDM-7837E Owner's Manual

Réception
radio
1
SOURCE
2
BAND
D.A.P.
3
TUNE
A.ME
Radio Operation
Automatic Memory of
Station Presets
Press the SOURCE button to select the radio
mode.
Press the BAND button repeatedly until the
desired radio band is displayed.
FM1
FM2
AM
Press and hold the A. ME button for at least 2
seconds. The frequency on the display
continues to change while the automatic
memory is in progress.
The tuner will automatically seek and store 6
strong stations in the selected band in order of
signal strength.
When the automatic memory has been
completed, the tuner goes to the station stored
in the preset location No. 1.
Note: If no stations are stored, the tuner will
return to the original station you were
listening to before the auto memory
procedure began.
English
17