Manual Storing Of Station Presets - Alpine CDM-7837E Owner's Manual

1
1
M.I.X.
CT
4
16
2 3
RPT SCAN
H M
5 6
Radio Operation
Manual Storing of Station
Presets
1. Tune in the desired radio station you wish to
store in the preset memory.
2. Press and hold any one of the preset
buttons (1 through 6) for at least 2 seconds.
The frequency display will begin to blink.
3. Press the preset button into which you wish
to store the station while the display is
blinking (within 5 seconds).
The display stops blinking to indicate that
the station has been memorized. The preset
number is also displayed.
4. Repeat the procedure to store 5 other
stations onto the same band. Use this
procedure for other bands.
A total of 24 stations can be stored in the preset
memory (6 stations for each band; FM1, FM2,
AM and D.A.P.).
Note: If a preset memory has already been set
in the same preset location, it will be
cleared and the new station will be
memorized.
English