Getting Started; Set-Up - Alcatel OT-806 User Manual

1

Getting started

1.1

Set-up

Removing or installing the back cover
Inserting or removing the SIM card
You must insert your SIM card to make phone calls. Please power off your
phone and remove battery before inserting or removing the SIM card.
Single SIM (OT-806/OT-807)
Dual SIM (OT-806D/OT-807D)
Place the SIM card with the chip facing downwards and slide it into its
housing. Make sure that it is correctly inserted. To remove the card, press
and slide it out.
Check with your network operator to make sure that your SIM card is 3V or
(1)
1.8V compatible. The old 5 Volt cards can no longer be used. Please contact
your operator.
.....................
(1)
13
Installing or removing the battery
Single SIM (OT-806/OT-807)
Dual SIM (OT-806D/OT-807D)
• Insert and click the battery into place, then close the telephone cover.
• Unclip the cover, then remove the battery.
Charging the battery
Connect the battery charger
• Charging may take about 20 minutes to start if the battery is flat.
• Be careful not to force the plug into the socket.
• Make sure the battery is correctly inserted before connecting the
charger.
14