Table of Contents
Advertisement
LS120
Select your boot device priority by LS120.
HDD-0~3
Select your boot device priority by HDD-0~3.
SCSI
Select your boot device priority by SCSI.
CDROM
Select your boot device priority by CDROM.
ZIP
Select your boot device priority by ZIP.
USB-FDD
Select your boot device priority by USB-FDD.
USB-ZIP
Select your boot device priority by USB-ZIP.
USB-CDROM Select your boot device priority by USB-CDROM.
USB-HDD
Select your boot device priority by USB-HDD.
LAN
Select your boot device priority by LAN.
Disabled
Select your boot device priority by Disabled.
Boot Up Floppy Seek
During POST, BIOS will determine the floppy disk drive installed is 40 or 80 tracks. 360 K type is
40 tracks 720 K, 1.2 M and 1.44 M are all 80 tracks.
Enabled
BIOS searches for floppy disk drive to determine it is 40 or 80 tracks. Note
that BIOS can not tell from 720 K, 1.2 M or 1.44 M drive type as they are
all 80tracks.
Disabled
BIOS will not search for the type of floppy disk drive by track number. Note
that there will not be any warning message if the drive installed is 360 K.
(Default value)
BootUp Num-Lock
When set On, allows the BIOS to automatically enable the Num Lock Function when the system
boots up.
On
Keypad is number keys. (Default value)
Off
Keypad is arrow keys.
Password Check
This feature allows you to limit access to the system and Setup, or just to Setup.
Please refer to the detail on P.48
System
The system can not boot and can not access to Setup page will be denied
if the correct password is not entered at the prompt.
- 29 -
BIOS Setup
Hide quick links:
Advertisement
Table of Contents
