Table of Contents
Advertisement
LS120
HDD-0~3
SCSI
CDROM
ZIP
USB-FDD
USB-ZIP
USB-CDROM Select your boot device priority by USB-CDROM.
USB-HDD
LAN
Disabled
Boot Up Floppy Seek
During POST, BIOS will determine the floppy disk drive installed is 40 or 80 tracks. 360 K type is
40 tracks 720 K, 1.2 M and 1.44 M are all 80 tracks.
Enabled
Disabled
BootUp Num-Lock
When set On, allows the BIOS to automatically enable the Num Lock Function when the system
boots up.
On
Off
Password Check
This feature allows you to limit access to the system and Setup, or just to Setup.
Please refer to the detail on P.48
System
Select your boot device priority by LS120.
Select your boot device priority by HDD-0~3.
Select your boot device priority by SCSI.
Select your boot device priority by CDROM.
Select your boot device priority by ZIP.
Select your boot device priority by USB-FDD.
Select your boot device priority by USB-ZIP.
Select your boot device priority by USB-HDD.
Select your boot device priority by LAN.
Select your boot device priority by Disabled.
BIOS searches for floppy disk drive to determine it is 40 or 80 tracks. Note
that BIOS can not tell from 720 K, 1.2 M or 1.44 M drive type as they are
all 80tracks.
BIOS will not search for the type of floppy disk drive by track number. Note
that there will not be any warning message if the drive installed is 360 K.
(Default value)
Keypad is number keys. (Default value)
Keypad is arrow keys.
The system can not boot and can not access to Setup page will be denied
if the correct password is not entered at the prompt.
2 9
BIOS Setup
Advertisement
Table of Contents
