Grundig GDP 1400 User Manual page 15

GETTING STARTED
Installation Picture Sound Child lock
TV format 4:3 PS
TV standard NTSC
Video output S-Video S-Video
RGB
Installation Picture Sound Child lock
TV format 4:3 PS 4:3 PS
TV standard NTSC 4:3 LB
Video output S-Video 16:9
Selecting the video output socket (EURO AV/RGB or
S-Video)
The video output of your DVD player has been set at the factory to »RGB«.
If you connect your DVD player using a Y/C cable
on the DVD player) to the television, you will need to set »S-Video« as the video
output for the video signal to be relayed to the television.
1
Call up the main menu with »SETUP« in stop mode.
2 Select the »Picture« menu item with
»ENTER«.
3
Select »Video output« with »
4
Select the desired video output (»RGB« for the
or »S-Video« for the »S-VIDEO
confirm with »ENTER«.
5
Press »SETUP« to conclude the setting.
Selecting the screen format of your television set
This setting depends on your television or flat screen, and on the information on
the DVD.
If you have a 4:3 format television or flat screen, the following settings are
available:
4:3 PS (Pan&Scan) for wide-screen playback, where the left and right edges
of the picture are cropped off (depending on the DVD in use). The device is set
to 4:3 PS at the factory.
or
4:3 LB (Letterbox) for wide-screen playback with black bars at the top and
bottom edges of the television screen.
If you have a 16:9 format television or flat screen, select the 16:9 setting.
1
Call up the main menu with »SETUP« in stop mode.
2 Select the »Picture« menu item with
»ENTER«.
3
Select »TV format« with »
4 Select the desired picture format (»4:3 PS«, »4:3 LB« or »16:9«) with »
or » « and confirm with »ENTER«.
A
5
Press »SETUP« to conclude the setting.
(»S-VIDEO
»a « or »s« and activate it with
S « or » A « and activate with »ENTER«.
»EURO AV
OUT« socket) with »S« or »A« and
»a « or »s« and activate it with
« or » « and activate with »ENTER«.
S A
OUT« socket
©
TV« socket
«
S
15