Working With Display Toggle - Wacom cintiq companion User Manual

WORKING WITH DISPLAY TOGGLE

The Display Toggle feature is available only on multiple monitor systems, in Desktop Mode.
Set an ExpressKey or pen side switch to the D
screen cursor between the Cintiq and your other displays. For example, the Cintiq can be used as a pen
display where the cursor is positioned at the pen tip location, or toggled for use as a standard Wacom
Tablet where the cursor can be moved across the entire desktop of any display on your system.
Open the Wacom Tablet control panel and make sure the Cintiq is the selected T
tab will be available if the system has two or more displays. The options on this tab define how the tablet
mapping is applied to each toggled display.
• P
EN DISPLAY TO DESKTOP
screen cursor from Cintiq to the entire
system desktop. Press the button a
second time to return the cursor to
Cintiq.
• P
EN DISPLAY TO OTHER DISPLAYS
the screen cursor from Cintiq to
another active pen display or monitor.
The cursor toggles to each connected
display in turn until it returns to the
Cintiq from where the initial toggle
began.
Important: When using application-specific
settings with Display Toggle, be sure each
customized application (including A
O ) has a tool button to which D
THER
T has been assigned. The easiest way
OGGLE
to do this is to assign D
ExpressKey before creating any
application-specific settings.
Contents
toggles the
toggles
LL
ISPLAY
T to an
ISPLAY OGGLE
A
function on the pen display.
•
•
Your selection is shown by the red box in the A
Contents
Index
T function. Then press that button to toggle the
ISPLAY OGGLE
A options determine the size of the area where the pen will
CTIVE REA
F P adjusts the size of the active area to
ORCE ROPORTIONS
maintain correct vertical and horizontal proportions between
Cintiq and the entire desktop or newly mapped-to display.
Depending on your settings, some portions of the active area
may no longer be usable when this option is selected. When
deselected, the correct scale or proportions are not maintained.
For example, drawing a circle on the pen display may create an
ellipse on a mapped-to screen.
U I A limits the active area to a sizing of 6 x 8 inches. If
SE NSET REA
F P is also selected, this sizing may be less.
ORCE ROPORTIONS
When deselected, as much of the active area as possible will be
used for tablet-to-display mapping.
Index
. The D T
ABLET ISPLAY OGGLE
A diagram.
CTIVE REA
60
60