Table of Contents
Advertisement
Connecting Power
Attach the USB end of the power adapter cable and the other end to a vehicle 12vdc receptacle.
Note: Some vehicles apply power to the vehicle power receptacle only when the ignition is on.
Checking Connection and Final Adjustments
If the power indicator light on the vehicle power adaptor is on, power is being supplied to the Magellan RoadMate
receiver. If it is not on, check the cable connection to the vehicle power receptacle. If the light is still not on, turn
the vehicle's ignition on.
Power Switch
Press and hold the power button 2 - 3 seconds to turn the receiver on or off. Press and hold the power button for
more then 5 seconds to reset the receiver should you have a problem with the receiver and are instructed to
reset the receiver.
Security
It is recommended that the Magellan RoadMate receiver is not left in plain view while unattended for reasons of
theft.
Please note that the Magellan RoadMate receiver is a receiver only and does not transmit GPS location signals.
Neither the receiver nor the vehicle can be tracked using the Magellan RoadMate receiver.
4
Advertisement
Table of Contents
