Assembly; Propaddle Lower Drive Shaft Assembly To Gear Housing Assembly; Propaddle Sweeper Drum Assembly - Echo SRM-2400SB Operator's Manual

99944200620

ASSEMBLY

ProPaddle Lower Drive Shaft Assembly to Gear Housing Assembly

Parts Required: ProPaddle Gear Housing Assembly, Lower
Drive Shaft Assembly, Tube Protector
1. Remove vinyl cap from lower end of drive shaft tube (end
without labels).
2. Remove gear housing shaft alignment screw (B) from right
side of gearcase.
3. Loosen gear housing shaft clamp bolt (C).
4. Insert tip of flex shaft (D) into gear housing drive socket.
5. Align hole in drive shaft tube (E) with alignment hole in gear
housing (B).
6. Insert lower driveshaft tube (end without model
number/coupling alignment decal) into gear housing shaft
mount.
7. Install and tighten alignment screw (B).
8. Tighten gear housing shaft clamp bolt (C).
9. Slide tube protector (A) flush against gearcase housing.

ProPaddle Sweeper Drum Assembly

Parts Required: ProPaddle Gear Housing/Lower Shaft
Assembly, 2 ProPaddle Sweeper Drums, 2
Plastic Drum Axles, 2 Clevis Pins, 2 Hitch
Pins, 2 Split Pins
X7532093905
© 10/2013 ECHO Inc.
ASSEMBLY
D
E
C
B
C
A
B
C
A
11