Table of Contents
Advertisement
S
PECIFICATIONS
MODEL ----------------------------------------------------- HCR-151
Length ------------------------------------------------------- 1060 mm (41.7 in.)
Width -------------------------------------------------------- 240 mm (9.45 in.)
Height ------------------------------------------------------- 200 mm (7.87 in.)
Weight, dry ------------------------------------------------- 4.9 kg (10.8 lb.)
Type of Engine --------------------------------------------- Air cooled, two-stroke, single cylinder, gasoline engine
Displacement ----------------------------------------------- 21.2 cc (1.29 cu.in.)
Bore ---------------------------------------------------------- 32.2 mm (1.27 in.)
Stroke -------------------------------------------------------- 26.0 mm (1.02 in.)
Exhaust System -------------------------------------------- Spark Arrestor Muffler w/catalyst
Carburetor -------------------------------------------------- Zama RB w/purge
Ignition System -------------------------------------------- Flywheel Magneto, Capacitor discharge ignition
Spark Plug -------------------------------------------------- BPM-8Y (Gap 0.65 mm (0.026 in.)
Fuel ---------------------------------------------------------- Mixed Fuel - gasoline and oil
Fuel/Oil Ratio ----------------------------------------------- 50:1 Ratio using ECHO Hi-Performance, two-stroke air cooled
Gasoline ----------------------------------------------------- 89 Octane Unleaded. Do not use fuel containing methyl alcohol,
Oil ------------------------------------------------------------ ECHO Hi-Performance, two-stroke air cooled engine oil
Fuel Tank Capacity ---------------------------------------- 0.5 lit. (16.9 fl. oz)
Starter System ---------------------------------------------- Automatic Recoil Starter
Clutch ------------------------------------------------------- Centrifugal Type
Gear Case Ratio -------------------------------------------- 5.88:1
Cutter -------------------------------------------------------- Double Edge (Double Reciprocating Blade)
Length ---------------------------------------------------- 490 mm (19.3 in.)
Pitch ------------------------------------------------------- 35 mm (1.4 in.)
Height ----------------------------------------------------- 21 mm (0.83 in.)
Idle Speed (RPM) ------------------------------------------ 2400 - 3200
Wide Open Throttle (RPM) ------------------------------- 9500 - 11,500
A
SSEMBLY
This model is factory assembled.
O
engine oil
more than 10% ethyl alcohol or 15% MTBE.
H
C
EDGE
LIPPER
'
M
PERATOR
S
ANUAL
9
Advertisement
Table of Contents
