Controlling What You See; Selecting And Adjusting A Camera Or Other Video Source - Polycom HDX Desktop Systems User Manual

Controlling What You See

Selecting and Adjusting a Camera or Other Video Source

© Polycom, Inc.
You can use the keypad to select and adjust the built-in camera. You may be
able to adjust other far-site cameras that support pan, tilt, and zoom
movement.
You can adjust the far-site camera only if it is configured to allow you to control it.
To select a near-site or far-site camera:
1. If you are in a call, press
either near-site or far-site control.
To adjust a camera using the keypad:
1. Press
Near or
far-site control. During a multipoint call being hosted by a system in the
call, you can only adjust a camera at the far site that is currently speaking.
2. Press the arrow buttons on the keypad to move the camera up, down, left,
or right.
3. Press
Zoom on the keypad to zoom out or in.
User's Guide for Polycom HDX Desktop Systems
Near or Far on the keypad to select
This onscreen icon indicates that you can control the
near-site camera. The
keypad is lit.
This onscreen icon indicates that you can control a
far-site camera or video source. The
on the keypad is lit.
Far on the keypad to select either near-site or
Near button on the
Far button
9