Table of Contents
Advertisement
GA-4KXSV-RH Motherboard
2-7
Frequency/Voltage Control
CMOS Setup Utility-Copyright (C) 1984-2005 Award Software
Robust Graphics Booster
C.A.M
CPU Host Clock Control
x CPU Host Frequency (Mhz)
System Memory Multiplier
x Memory Frequency (Mhz)
: Move
Enter: Select
F5: Previous Values
Wrong frequency may cause system can't boot. Clear CMOS will overcome wrong
frequency setting issue.
Robust Graphics Booster
Select the options can enhance the VGA graphics card bandwidth to get higher performance.
Auto
Set Robust Graphics Booster to Auto. (Default value)
Fast
Set Robust Graphics Booster to Fast.
Turbo
Set Robust Graphics Booster to Turbo.
C.A.M
High
Set clock ratio for frequency-locked CPU to High. (Default value)
Low
Set clock ratio for frequency-locked CPU to Low.
CPU Host Clock Control
Please note that if your system is overclocked and cannot restart, please wait 20secs.
for automatic system restart or clear the CMOS setup data and perform a safe restart.
Disabled
Disable CPU Host Clock Control. (Default value)
Enabled
Enable CPU Host Clock Control.
CPU Host Frequency (Mhz)
100MHz ~ 600MHz
If you use FSB533 Pentium 4 processor, please set "CPU Host Frequency" to 133MHz.If you use
FSB800 Pentium 4 processor, please set "CPU Host Frequency" to 200MHz.
Incorrect using it may cause your system broken. For power End-User use only!
Auto
Set Memory frequency by DRAM SPD data. (Default value)
MB Intelligent Tweaker(M.I.T.)
[Auto]
[High]
[Disabled]
200
[Auto]
667
+/-/PU/PD: Value
F10: Save
F6: Fail-Safe Defaults
Set CPU Host Frequency from 100MHz to 600MHz.
48
Item Help
Menu Level
ESC: Exit
F1: General Help
F7: Optimized Defaults
Advertisement
Table of Contents
