Gigabyte 586SG User Manual page 57

586SG
The total memory size is 8 - 768 MB.
For the DRAM installation position, please refer to Figure 3.1. Note that the
Pin 1 of SIMM module must match with the Pin 1 of SIMM socket when the
DRAM SIMM module is installed.
Insert the DRAM SIMM module into the SIMM socket at 45 degree angle.
If there is a wrong direction of Pin 1, the DRAM SIMM module couldn't be
inserted into socket completely.
After completely insert SIMM module into socket, then press the SIMM
module in vertical direction until the left and right metal holders can keep the
SIMM module standing up firmly.
DRAM configuration table:
(Bank1 and DIMM1 can not install at same time)
Bank0 Bank1
4MB * 2pcs.
8MB * 2pcs.
4MB * 2pcs. 4MB * 2pcs.
4MB * 2pcs.
8MB * 2pcs.
4MB * 2pcs.
8MB * 2pcs.
8MB * 2pcs. 8MB * 2pcs.
16MB * 2pcs.
8MB * 2pcs.
4MB * 2pcs. 16MB * 2pcs.
4MB * 2pcs.
DIMM1 DIMM2
8MB
16MB
8MB 8MB
8MB 8MB
8MB 16MB
8MB
16MB 16MB
8MB 16MB
8MB 8MB
32MB
16MB
32MB
3-5
TOTAL
8MB
8MB
16MB
16MB
16MB
16MB
24MB
24MB
24MB
32MB
32MB
32MB
32MB
32MB
32MB
32MB
40MB
40MB