Gigabyte 6OMM7 User Manual page 72

6OMM7 Motherboard
POWER ON Function
Password
Mouse Click
BUTTON ONLY
Keyboard 98
KB Power ON Password
Enter
Onboard FDC Controller
Enabled Enabled onboard FDC port. (Default value)
Disabled Disabled onboard FDC port.
Onboard Serial Port 1
Auto BIOS will automatically setup the port 1 address.
3F8/IRQ4 Enabled onboard Serial port 1 and address is 3F8. (Default value)
2F8/IRQ3 Enabled onboard Serial port 1 and address is 2F8.
3E8/IRQ4 Enabled onboard Serial port 1 and address is 3E8.
2E8/IRQ3 Enabled onboard Serial port 1 and address is 2E8.
Disabled Disabled onboard Serial port 1.
Onboard IR Port
Auto
3F8/IRQ4
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
Disabled
UART Mode Select
(This item allows you to determine which Infra Red(IR) function of Onboard I/O chip)
ASKIR Set onboard I/O chip UART to ASKIR Mode.
IrDA Set onboard I/O chip UART to IrDA Mode. (Default Value)
SCR Set onboard I/O chip UART to SCR Mode.
Enter from 1 to 5 characters to set the Keyboard Power On
Password.
Double click on PS/2 mouse left button.
If your keyboard have "POWER Key" button, you can press the key
to power on your system. (Default value)
Windows 98 keyboard "Power" key.
Enter from 1 to 5 characters to set the Keyboard Power On Password.
BIOS will automatically setup the IR Port address.
Enabled onboard IR Port and address is 3F8.
Enabled onboard IR Port and address is 2F8. (Default Value)
Enabled onboard IR Port and address is 3E8.
Enabled onboard IR Port and address is 2E8.
Disabled onboard IR Port.
57