Gigabyte GA-6OMM7 User Manual
Gigabyte GA-6OMM7 User Manual

Gigabyte GA-6OMM7 User Manual

Socket 370 processor motherboard
Hide thumbs Also See for GA-6OMM7:
Table of Contents

Advertisement

Quick Links

DECLARATION OF CONFORMITY
Per FCC Part 2 Section 2. 1077(a)
Responsible Party Name: G.B.T. INC.
Address: 18305 Valley Blvd., Suite#A
LA Puent, CA 91744
Phone/Fax No: (818) 854-9338/ (818) 854-9339
hereby declares that the product
Product Name:
Mother Board
Model Number:
GA-6OMM7
Conforms to the following specifications:
FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109(a),
Class B Digital Device
Supplementary Information:
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful
and
(2)
this device must accept any inference received, including
that may cause undesired operation.
Representative Person's Name:
ERIC LU
Eric Lu
Signature:
Date:
Jun. 13, 2000
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna
-Move the equipment away from the receiver
-Plug the equipment into an outlet on a circuit different from that to which
the receiver is connected
-Consult the dealer or an experienced radio/television technician for
additional suggestions
You are cautioned that any change or modifications to the equipment not
expressly approve by the party responsible for compliance could void Your
authority to operate such equipment.
This device complies with Part 15 of the FCC Rules. Operation is subjected to
the following two conditions 1) this device may not cause harmful interference
and 2) this device must accept any interference received, including interference
that may cause undesired operation.
FCC Compliance Statement:
This equipment has been tested and found to
comply with limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable
protection against harmful interference in
residential
installations.
generates,
uses,
frequency energy, and if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause interference to radio or
television equipment reception, which can be
This
equipment
and
can
radiate
radio

Advertisement

Table of Contents
loading

Summary of Contents for Gigabyte GA-6OMM7

  • Page 1 Phone/Fax No: (818) 854-9338/ (818) 854-9339 hereby declares that the product Product Name: Mother Board Model Number: GA-6OMM7 Conforms to the following specifications: FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109(a), Class B Digital Device Supplementary Information: This device complies with part 15 of the FCC Rules. Operation is subject to the...
  • Page 2: Declaration Of Conformity

    Safety of household and similar electrical appliances (Stamp) Declaration of Conformity We, Manufacturer/Importer (full address) G.B.T. Technology Träding GMbH declare that the product Mother Board GA-6OMM7 is in conformity with EN 61000-3-2* EN60555-2 EN61000-3-3* EN60555-3 EN 50081-1 EN 50082-1 EN 55081-2...
  • Page 3 6OMM7 Socket 370 Processor Motherboard USER'S MANUAL Socket 370 Processor Motherboard REV. 1.2 Third Edition...
  • Page 4 R-12-03-000727...
  • Page 5 How This Manual Is Organized This manual is divided into the following sections: 1) Revision History 2) Item Checklist 3) Features 4) Hardware Setup 5) Performance & Block Diagram 6) Suspend to RAM 7) BIOS Setup 8) Appendix Manual revision information Product item list Product information &...
  • Page 7: Table Of Contents

    Revision History Item Checklist Summary of Features 6OMM7 Motherboard Layout Page Index for CPU Speed Setup/Connectors/Panel and Jumper Definition Performance List Block Diagram Suspend to RAM Installation (Optional) Memory Installation Page Index for BIOS Setup Appendix Table Of Content P.29 P.30 P.31 P.37...
  • Page 8: Revision History

    6OMM7 Motherboard Revision History Revision Revision Note Initial release of the 6OMM7 motherboard user’s manual. Initial release of the 6OMM7 motherboard user’s manual. Second release of the 6OMM7 motherboard user’s manual. Third release of the 6OMM7 motherboard user’s manual. The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make a commitment to update the information contained herein.
  • Page 9: Item Checklist

    Item Checklist Item Checklist þThe 6OMM7 motherboard þCable for IDE / floppy device þDiskettes or CD (IUCD) for motherboard driver & utility þ6OMM7 user’s manual...
  • Page 10: Summary Of Features

    6OMM7 Motherboard Summary Of Features Form Factor Ÿ Ÿ Ÿ Chipset Ÿ Ÿ Clock Generator Ÿ Ÿ Memory Ÿ Ÿ Ÿ Ÿ I/O Control Ÿ Slots Ÿ Ÿ Ÿ Ÿ On-Board IDE Ÿ Ÿ On-Board Ÿ Peripherals Ÿ Ÿ Ÿ Ÿ...
  • Page 11 PS/2 Connector Ÿ BIOS Ÿ Additional Features Ÿ Ÿ Ÿ Ÿ PS/2 keyboard interface and PS/2 mouse interface Licensed AWARD BIOS, 4M bit Flash ROM Supports Wake-on-LAN (WOL) Supports Internal / External modem wake up Includes 3 fan power connectors Poly fuse for keyboard over-current protection Summary of Features...
  • Page 12: 6Omm7 Motherboard Layout

    6OMM7 Motherboard 6OMM7 Motherboard Layout PS/2 JP25 6OMM7 BAT1 JP27 DFP/TV AC’97 PCI1 PCI2 JP20 PCI3 JP21 JP24 PGA 370 FW82815 JP23 JP18 JP22 LED1 JP12 JP13 ICH82801 JP14 JP15...
  • Page 13: Page Index For Cpu Speed Setup/Connectors/Panel And Jumper Definition

    Page Index for CPU Speed Setup/Connectors/Panel and Jumper Definition CPU Speed Setup Connectors Game & Audio Port COM A / VGA / LPT Port USB Connector PS/2 Keyboard & PS/2 Mouse Connector J1 (CPU Fan) J2 (Power Fan) J14 (System Fan) ATX Power JP13 (IR/CIR) Floppy Port...
  • Page 14 6OMM7 Motherboard JP14 (Timeout Reboot Function) P.26...
  • Page 15 JP15 (Safe mode/Recovery/Normal) JP23 (PCI/AGP 3VAUX) JP24 (AMR Selection) [Optional] BAT1 (Battery) 6OMM7 Motherboard Layout P.26 P.27 P.27 P.28...
  • Page 16: Cpu Speed Setup

    CPU Speed Setup The system bus frequency can be switched at 66MHz, 100MHz, 133MHz and Auto by adjusting JP10/JP11/JP26 (See Figure 1). The CPU Frequency is control by BIOS. The CPU speed must match with the frequency RATIO. It will cause system hanging up if the frequency RATIO is higher than that of CPU.
  • Page 17: Connectors

    6OMM7 Motherboard Connectors Game & Audio Port Game Port MIC In Line Out Line In COM A / VGA / LPT Port LPT Port COM A...
  • Page 18: Usb Connector

    6OMM7 Motherboard USB Connector PS/2 Keyboard & PS/2 Mouse Connector Pin No. Definition USB V0 USB D0- USB D0+ USB V1 USB D1- 1 2 3 4 USB D1+ PS/2 Mouse PS/2 Keyboard PS/2 Mouse/ Keyboard Pin No. Definition Data VCC(+5V) Clock...
  • Page 19: J1: Cpu Fan

    J1: CPU Fan J2: Power Fan Pin No. Definition +12V SENSE Pin No. Definition +12V SENSE Connectors...
  • Page 20: J14: System Fan

    6OMM7 Motherboard J14: System Fan ATX Power Pin No. Definition +12V SENSE Pin No. 3,5,7,13,15-17 1,2,11 4,6,19,20 5V SB stand by+5V PS-ON(Soft On/Off) Definition 3.3V +12V -12V Power Good...
  • Page 21: Jp13: Ir/Cir

    JP13: IR/CIR Floppy Port Pin No. Definition CIRRX Red Line Connectors IRRX IRTX...
  • Page 22: Ide 1(Primary)/ Ide 2(Secondary) Port

    6OMM7 Motherboard IDE1 (Primary), IDE2 (Secondary) Port J13: Ring Power On (Internal Modem Card Wake Up) IDE 2 IDE 1 Red Line Pin No. Definition Signal...
  • Page 23: J12: Wake On Lan

    J12: Wake On LAN J7: TEL: The connector is for Modem with internal voice connector Pin No. Definition +5V SB Signal Pin No. Definition Signal-In Signal-Out Connectors...
  • Page 24: J6: Aux_In

    6OMM7 Motherboard J6: AUX_IN J5: CD Audio Line In Pin No. Definition AUX-L AUX-R Pin No. Definition CD-L CD-R...
  • Page 25: Jp7: Str Led Connector & Led1: Dimm Led (Optional)

    JP7: STR LED Connector & LED1: DIMM LED (Optional) Front USB Port (Optional) DIMM LED STR LED Connector External Pin No. Definition 1,4,5,10 3,7,9 USBP0+ USBP0- Connectors...
  • Page 26: J10: Extra Smbus

    6OMM7 Motherboard J10: Extra SMBUS JP25: USB Port Selection (Optional) Front Panel USB Enable Back Panel USB Enable FPUSB 1-2close 4-5close Pin No. Definition SMB CLK SMB DATA BPUSB(Default) 2-3close 5-6close...
  • Page 27: Dfp/Tv Out Connector

    DFP/TV Out Connector íUse only for Gigabyte Digital Flat Panel/TV-Out Daughter card (GA-DFP-x). JP27: SCR: Smart Card Reader Pin No. Definition 2,3,4,8,13 5,6,10,12 DATA Clock 9,14 Connectors...
  • Page 28: Panel And Jumper Definition

    Panel And Jumper Definition J11: For 2x11 Pins Jumper GN (Green Switch) GD (Green LED) HD (IDE Hard Disk Active LED) SPK (Speaker Connector) RE (Reset Switch) P+P P (Power LED) PW (Soft Power Connector) Panel and Jumper Definition Open: Normal Operation Close: Entering Green Mode Pin 1: LED anode(+) Pin 2: LED cathode( )
  • Page 29 Panel and Jumper Definition...
  • Page 30: Jp18: Clear Cmos Function

    6OMM7 Motherboard JP18: Clear CMOS Function JP4: STR Enable (Optional) Pin No. Definition 1-2 close Clear CMOS 2-3 close Normal (Default) Pin No. Definition Open STR Disabled (Default) Close STR Enabled...
  • Page 31: Jp3: Ps/2 Keyboard Power On

    JP3: PS/2 Keyboard Power On JP22: Case Open Panel and Jumper Definition Pin No. Definition 1-2 close PS/2 Keyboard Power on Enabled 2-3 close Normal (Default) Pin No. Definition Signal...
  • Page 32: Jp1 (Rear Usb Device Wake Up Selection)

    6OMM7 Motherboard JP1: Rear USB Device Wake up Selection (USB Connector à CN2) (If you want to use “USB KB/Mouse Wake from S3” function, you have to set the BIOS setting “USB KB/Mouse Wake from S3” enabled, and the jumper “JP1” enabled). *(Power on the computer and as soon as memory counting starts, press <Del>.
  • Page 33: Jp21: Top Block Lock

    JP21: Top Block Lock JP5: Over Voltage CPU Speed Up (Magic Booster) (When JP5 set “Close”, CPU Voltage is rising 10%) Panel and Jumper Definition Pin No. Definition Open Top Block Lock Close Top Block Unlock (Default) Pin No. Definition Close Turbo [Voltage enhance 10%]...
  • Page 34: Jp6: Dimm Over Voltage (Optional)

    6OMM7 Motherboard JP6: DIMM Over Voltage (Optional) JP12: Internal Buzzer (Optional) Pin No. Definition Close Enabled DIMM Over Voltage Open Disabled DIMM Over Voltage (Default) Pin No. Definition Open Internal Buzzer Disabled Close Internal Buzzer Enabled (Default)
  • Page 35 JP14: Timeout Reboot Function JP15: Safe mode/Recovery/Normal Panel and Jumper Definition Pin No. Definition Open Timeout Reboot Close No Reboot on Timeout Pin No. Definition 1-2close Normal (Default) 2-3close Safe mode 1-2-3open Recovery...
  • Page 36 6OMM7 Motherboard JP23: PCI/AGP 3VAUX JP24: AMR Selection (Optional) Pin No. Definition Open Disabled PCI/AGP 3VAUX Function Close Enabled PCI/AGP 3VAUX (Default) Pin No. Definition 1-2close AMR Secondary AMR Primary 2-3close AC’97 Disabled (Default) (Disabled Onboard CODEC)
  • Page 37 BAT1: Battery Panel and Jumper Definition Danger of explosion if battery is incorrectly replaced. + Replace only with the same or equivalent type recommended by the manufacturer. + Dispose of used batteries according to the manufacturer’s instructions.
  • Page 38: Performance List

    6OMM7 Motherboard Performance List The following performance data list is the testing results of some popular benchmark testing programs. These data are just referred by users, and there is no responsibility for different testing data values gotten by users. (The different Hardware & Software configuration will result in different benchmark testing results.) Intel ®...
  • Page 39: Block Diagram

    Block Diagram 2X/4X Display Display Cache ATA66 IDE Channels DFP/TV 2 USB Ports COM Port IT8712 LPT Ports PS/2 Socket 370 66/100/133 MHz Host Bus 66/100/133MHz Intel FW82815 14.318/33/48/66 MHz Interface PCI Bus 33MHz 82801AA AC’ 97 Link Game Port AC’97 SMART Card Reader...
  • Page 40: Suspend To Ram Installation (Optional)

    6OMM7 Motherboard Suspend To RAM Installation (Optional) A.1 Introduce STR function: Suspend-to-RAM (STR) is a Windows 98 ACPI sleep mode function. When recovering from STR (S3) sleep mode, the system is able, in just a few seconds, to retrieve the last “state” of the system before it went to sleep and recover to that state.
  • Page 41 Step 2: (If you want to use STR Function, please set jumper JP4 Closed.) Step 3: Power on the computer and as soon as memory counting starts, press <Del>. You will enter BIOS Setup. Select the item “POWER MANAGEMENT SETUP”, then select “ Suspend Type : S3(Suspend to RAM)”.
  • Page 42 6OMM7 Motherboard A.3 How to put your system into STR mode? There are two ways to accomplish this: Choose the “Stand by” item in the “Shut Down Windows” area. A. Press the “Start” button and then select “Shut Down” B. Choose the “Stand by” item and press “OK”...
  • Page 43 Suspend to RAM Installation Define the system ”power on” button to initiate STR sleep mode: A. Double click “My Computer” and then “Control Panel” B. Double click the “ Power Management” item.
  • Page 44 6OMM7 Motherboard C. Select the “Advanced” tab and “Standby” mode in Power Buttons. Step 4: Restart your computer to complete setup. Now when you want to enter STR sleep mode, just momentarily press the “Power on” button.. A.4 How to recover from the STR sleep mode? There are seven ways to “wake up”...
  • Page 45 A.5 Notices: In order for STR to function properly, several hardware and software requirements must be satisfied: A. Your ATX power supply must comply with the ATX 2.01 specification (provide more than 720 mA 5V Stand-By current). B. Your SDRAM must be PC-100 compliant. 2.
  • Page 46: Memory Installation

    6OMM7 Motherboard Memory Installation The motherboard has 3 dual inline memory module (DIMM) sockets. The BIOS will automatically detects memory type and size. To install the memory module, just push it vertically into the DIMM Slot .The DIMM module can only fit in one direction due to the two notch. Memory size can vary between sockets.
  • Page 47: Page Index For Bios Setup

    $ Page Index for BIOS Setup Main Menu Standard CMOS Features Advanced BIOS Features Advanced Chipset Features Integrated Peripherals Power Management Setup PnP/ PCI Configurations PC Health Status Frequency / Voltage Control Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor / User Password Save &...
  • Page 48: Entering Setup

    6OMM7 Motherboard BIOS Setup BIOS Setup is an overview of the BIOS Setup Program. The program that allows users to modify the basic system configuration. This type of information is stored in battery-backed CMOS RAM so that it retains the Setup information when the power is turned off. ENTERING SETUP Power ON the computer and press <Del>...
  • Page 49: Main Menu

    GETTING HELP Main Menu The on-line description of the highlighted setup function is displayed at the bottom of the screen. Status Page Setup Menu / Option Page Setup Menu Press F1 to pop up a small help window that describes the appropriate keys to use and the possible selections for the highlighted item.
  • Page 50 6OMM7 Motherboard Standard CMOS Features This setup page includes all the items in standard compatible BIOS. Advanced BIOS Features This setup page includes all the items of Award special enhanced features. Advanced Chipset Features This setup page includes all the items of chipset special features. Integrated Peripherals This setup page includes all onboard peripherals.
  • Page 51 BIOS Setup...
  • Page 52 6OMM7 Motherboard Save & Exit Setup Save CMOS value settings to CMOS and exit setup. Exit Without Saving Abandon all CMOS value changes and exit setup.
  • Page 53 Standard CMOS F includes no, one or more than one setup items. Use the arrows to highlight the item and then use the <PgUp> or <PgDn> keys to select the value you want in e CMOS Setup Utility-Copyright( C ) 1984-2000 Award Software Date (mm:dd:yy) Time (hh:mm:ss) 4IDE Primary Master...
  • Page 54 6OMM7 Motherboard Time The times format in <hour> <minute> <second>. The time is calculated base on the 24-hour military-time clock. For example, 1 p.m. is 13:00:00. IDE Primary Master, Slave / Secondary Master, Slave The category identifies the types of hard disk from drive C to F that has been installed in the computer.
  • Page 55 Floppy 3 Mode Support (for Japan Area) Disabled Normal Floppy Drive. (Default value) Drive A Drive A is 3 mode Floppy Drive. Drive B Drive B is 3 mode Floppy Drive. Both Drive A & B are 3 mode Floppy Drives. Video The category detects the type of adapter used for the primary system monitor that must match your video display card and monitor.
  • Page 56: Extended Memory

    6OMM7 Motherboard Memory is display- BIOS. The POST of the BIOS will determine the amount of base (or conventional) The value of the base memory is typically 512 K for systems installed on the motherboard, or 640 K for systems with 640 K or more memory installed on the motherboard.
  • Page 57: Advanced Bios Features

    Advanced BIOS Features CMOS Setup Utility-Copyright( C ) 1984-2000 Award Software Virus Warning BIOS Flash Protection ø Processor Number Feature First Boot Device Second Boot Device Third Boot Device Boot Up Floppy Seek Boot Up NumLock Status Security Option HDD S.M.A.R.T. Capability Report No FDD For WIN 95 :Move Enter:Select +/ /PU/PD:Value F10:Save ESC:Exit Figure 4: Advanced BIOS Features...
  • Page 58 6OMM7 Motherboard BIOS Flash Protection Enabled Enabled BIOS Flash Protection. Disabled BIOS Flash Protection. (Default Value) Disabled Processor Number Feature This item will show up when you install the Pentium ® !!! Processor Number Feature. (Default value) Enabled Pentium Disabled Disable this function.
  • Page 59: Security Option

    Security Option This category allows you to limit access to the system and Setup, or just to Setup. System The system can not boot and can not access to Setup page will be denied if the correct password is not entered at the prompt. Setup The system will boot, but access to Setup will be denied if the correct password is not entered at the prompt.
  • Page 60: Advanced Chipset Features

    6OMM7 Motherboard Advanced Chipset Features CMOS Setup Utility-Copyright( C ) 1984-2000 Award Software Advanced Chipset Features Top Performance SDRAM Timing Control ø SDRAM CAS Latency Time ø SDRAM Cycle Time Tras/Trc ø SDRAM RAS-to-CAS Delay ø SDRAM RAS Precharge Time Delayed Transaction On-Chip Video Window Size AGP Graphics Aperture Size...
  • Page 61 Set SDRAM Tras/Trc Cycle time is 6/8 SCLKs. (Default value) Set SDRAM Tras/Trc Cycle time is 5/7 SCLKs. SDRAM RAS- -CAS delay Set SDRAM RAS-to-CAS delay 2 SCLKs. SDRAM RAS Precharge Time Set SDRAM RAS Precharge Time to 3. (Default value) Set SDRAM RAS Precharge Time to 2.
  • Page 62 6OMM7 Motherboard Enabled Initial Display Cache. (Default value) Enabled...
  • Page 63 Display Cache Timing Auto Set Display Cache Timing to Auto. (Default value) Fast Set Display Cache Timing to Fast. Normal Set Display Cache Timing to Normal. BIOS Setup...
  • Page 64: Integrated Peripherals

    6OMM7 Motherboard Integrated Peripherals CMOS Setup Utility-Copyright( C ) 1984-2000 Award Software On-Chip Primary PCI IDE On-Chip Secondary PCI IDE IDE Primary Master PIO IDE Primary Slave PIO IDE Secondary Master PIO IDE Secondary Slave PIO IDE Primary Master UDMA IDE Primary Slave UDMA IDE Secondary Master UDMA IDE Secondary Slave UDMA...
  • Page 65 On-Chip Secondary PCI IDE Enabled Enabled onboard 2nd channel IDE port. (Default value) Disabled Disabled onboard 2nd channel IDE port. IDE Primary Master PIO (for onboard IDE 1st channel) Auto BIOS will automatically detect the IDE HDD Accessing mode. (Default value) Mode0~4 Manually set the IDE Accessing mode.
  • Page 66 6OMM7 Motherboard IDE Secondary Master UDMA Auto BIOS will automatically detect the IDE HDD Accessing mode. (Default value) Disabled Disable UDMA function. IDE Secondary Slave UDMA Auto BIOS will automatically detect the IDE HDD Accessing mode. (Default value) Disabled Disabled UDMA function. USB Controller Enabled USB Controller.
  • Page 67: Onboard Fdc Controller

    POWER ON by Keyboard Password Enter from 1 to 5 characters to set the Keyboard Power On Password. Disabled Disabled this function. (Default value) Keyboard 98 If your keyboard have “POWER Key” button, you can press the key to power on your system. KB Power ON Password Enter Enter from 1 to 5 characters to set the Keyboard Power On Password.
  • Page 68: Onboard Parallel Port

    6OMM7 Motherboard UART Mode Select (This item allows you to determine which Infra Red(IR) function of Onboard I/O chip) ASKIR Set onboard I/O chip UART to ASKIR Mode. IrDA Set onboard I/O chip UART to IrDA Mode. (Default Value) Set onboard I/O chip UART to SCR Mode. UR2 Duplex Mode IR Function Duplex Half.
  • Page 69 Midi Port IRQ Set 5 for Midi Port IRQ. Set 10 for Midi Port IRQ. (Default Value) BIOS Setup...
  • Page 70: Power Management Setup

    6OMM7 Motherboard Power Management Setup CMOS Setup Utility-Copyright( C ) 1984-2000 Award Software Power Management Setup ÜACPI Suspend Type Video Off Method Suspend Type MODEM Use IRQ Suspend Mode HDD Power Down Soft-Off by PWR-BTTN Power LED in Suspend Wake-Up by PCI card ModemRingOn/WakeOnLan ÜUSB KB/Mouse Wake From S3 FAN Off In Suspend...
  • Page 71: Suspend Type

    Video off Method V/H SYNC+Blank BIOS will turn off V/H-SYNC when gets into Green mode for Green monitor power saving. Blank Screen BIOS will only black monitor when gets into Green mode. DPMS BIOS will use DPMS Standard to control VGA card. (The Green type VGA card will turn off V/H-SYNC automatically.) (Default value) Suspend Type...
  • Page 72 6OMM7 Motherboard Power LED in Suspend Blinking Set Power LED in Suspend at Blinking mode. (Default value) Set Power LED in Suspend at On mode. Off/Dual Set Power LED in Suspend at Off/Dual color mode. Wake-Up by PCI card Disabled Disabled this function.
  • Page 73 Resume by Alarm You can set “Resume by Alarm” item to Enabled and key in date/time to power on system. Disabled Disable this function. (Default value) Enabled Enable alarm function to POWER ON system. If the default value is Enabled. Date ( of Month) Alarm : Time ( hh: mm: ss) Alarm : Primary IDE 0/1...
  • Page 74: Pnp/Pci Configurations

    6OMM7 Motherboard PnP/PCI Configurations CMOS Setup Utility-Copyright( C ) 1984-2000 Award Software Reset Configuration Data Resources Controlled By X IRQ Resources PCI/VGA Palette Snoop Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults Figure 8: PnP/PCI Configurations Reset Configuration Data Disabled this function.
  • Page 75 PCI/VGA Palette Snoop Enabled For having Video Card on ISA Bus and VGA Card on PCI Bus. Disabled For VGA Card only. (Default value) BIOS Setup...
  • Page 76: Pc Health Status

    6OMM7 Motherboard PC Health Status CMOS Setup Utility-Copyright( C ) 1984-2000 Award Software Reset Case Open Status Case Opened VCORE VGTL VCC3 + 5V +12V - 12V 5VSB(V) VBAT(V) Current CPU Temperature CPU FAN Speed Power FAN Speed System FAN speed CPU Temperature Select Shutdown Temperature CPU FAN Fail Alarm...
  • Page 77 CPU FAN / Power FAN / System FAN Speed (RPM) Detect Fan speed status automatically. CPU Temperature Select ( C) 65 C / 149 F Monitor CPU Temp. at 65 C / 149 F. 70 C / 158 F Monitor CPU Temp. at 70 C / 158 F. 75 C / 167 F Monitor CPU Temp.
  • Page 78: Frequency/Voltage Control

    6OMM7 Motherboard Frequency/Voltage Control CMOS Setup Utility-Copyright( C ) 1984-2000 Award Software Frequency/Voltage Control Auto Detect DIMM/PCI Clk CPU Clock Ratio Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults Figure 10: Frequency/Voltage Control Auto Detect DIMM/PCI Clk Disabled Disabled Auto Detect DIMM/PCI Clk.
  • Page 79: Load Fail-Safe Defaults

    Load Fail-Safe Defaults CMOS Setup Utility-Copyright( C ) 1984-2000 Award Software 4 Standard CMOS Features 4Advanced BIOS Features 4Advanced Chipset Features 4Integrated Peripherals 4Power Management Setup 4PnP/PCI Configurations Load Fail-Safe Defaults (Y/N)? N 4PC Health Status ESC:Quit F10:Save & Exit Setup Figure 11: Load Fail-Safe Defaults Load Fail-Safe Defaults Fail Safe defaults contain the most appropriate values of the system parameters that allow...
  • Page 80: Load Optimized Defaults

    6OMM7 Motherboard Load Optimized Defaults CMOS Setup Utility-Copyright( C ) 1984-2000 Award Software 4 Standard CMOS Features 4Advanced BIOS Features 4Advanced Chipset Features 4Integrated Peripherals 4Power Management Setup 4PnP/PCI Configurations Load Optimized Defaults (Y/N)? N 4PC Health Status ESC:Quit F10:Save & Exit Setup Figure 12: Load Optimized Defaults Load Optimized Defaults Selecting this field loads the factory defaults for BIOS and Chipset Features which the...
  • Page 81: Set Supervisor / User Password

    Set Supervisor / User Password When you select this function, the following message will appear at the center of the screen to assist you in creating a password. CMOS Setup Utility-Copyright( C ) 1984-2000 Award Software 4 Standard CMOS Features 4Advanced BIOS Features 4Advanced Chipset Features 4Integrated Peripherals...
  • Page 82: Save & Exit Setup

    6OMM7 Motherboard Save & Exit Setup CMOS Setup Utility-Copyright( C ) 1984-2000 Award Software 4 Standard CMOS Features 4Advanced BIOS Features 4Advanced Chipset Features 4Integrated Peripherals 4Power Management Setup 4PnP/PCI Configurations SAVE to CMOS and EXIT (Y/N)? Y 4PC Health Status ESC:Quit F10:Save &...
  • Page 83: Exit Without Saving

    Exit Without Saving CMOS Setup Utility-Copyright( C ) 1984-2000 Award Software 4 Standard CMOS Features 4Advanced BIOS Features 4Advanced Chipset Features 4Integrated Peripherals 4Power Management Setup 4PnP/PCI Configurations Quit Without Saving (Y/N)? N 4PC Health Status ESC:Quit F10:Save & Exit Setup Type "Y"...
  • Page 84: Appendix

    6OMM7 Motherboard Appendix Appendix A: Intel 815 Chipsets Driver Installation A. Windows 9x INF Update Utility Insert the support CD that came with your motherboard into your CD-ROM drive or double-click the CD drive icon in My Computer to bring up the setup screen. 1.Click “Windows 9x INF Update Utility”...
  • Page 85 Appendix 5.Click “Finish” to restart computer.
  • Page 86 6OMM7 Motherboard B: Intel 815 Chipsets VGA Graphics Driver Installation Insert the support CD that came with your motherboard into your CD-ROM drive or double-click the CD drive icon in My Computer to bring up the setup screen. 1.Click “Intel 815 Chipset VGA Graphics Driver”...
  • Page 87 C. Intel ICH IDE ATA66 Driver Installation Insert the support CD that came with your motherboard into your CD-ROM drive or double-click the CD drive icon in My Computer to bring up the setup screen. 1.Click “Intel ICH IDE ATA66 Driver”...
  • Page 88 6OMM7 Motherboard 6.Click “Finish” to restart computer.
  • Page 89 Appendix B: SigmaTel Sound Driver Installation Insert the support CD that came with your motherboard into your CD-ROM drive or double-click the CD drive icon in My Computer to bring up the setup screen. Press “Audio” 1.Click “SigmaTel icon. Sound Driver. 3.Click “Yes “.
  • Page 90 C:\utility\ AWDFlash or AMIFlash <filename of the BIOS binary file intended for flashing>. Once the process is finished, reboot the system. ü MNote: Please download the newest BIOS from our website (www.gigabyte.com.tw) or contact your local dealer for the file.
  • Page 91 Appendix Appendix D: Issues To Beware Of When Installing AMR Please use inverse AMR card like the one in order to avoid mechanical problem. (See Figure A) PCI Slot Figure A: Inverse AMR Card (Default) PCI Slot Figure B: Non inverse AMR Card...
  • Page 92 6OMM7 Motherboard Appendix E: Issues To Beware Of When Installing GA-AIMM Card (Optional) Install: 1.Insert the card at an angle as shown below. Push the card forward a little making sure it’ s tight. Remove: 3.Push the extruding piece of the AGP retention module out.
  • Page 93 Appendix F: Acronyms Acro. Meaning ACPI Advanced Configuration and Power Interface POST Power-On Self Test Local Area Network Extended Capabilities Port Advanced Power Management Direct Memory Access Megahertz ESCD Extended System Configuration Data Central Processing Unit Symmetric Multi-Processing Universal Serial Bus Operating System Error Checking and Correcting Integrated Dual Channel Enhanced...
  • Page 94 6OMM7 Motherboard Acro. Meaning Peripheral Component Interconnect RIMM Rambus in-line Memory Module Dual Retention Mechanism Industry Standard Architecture Memory Translator Hub CRIMM Continuity RIMM...

Table of Contents