Gigabyte 6CX7 Series User Manual page 44

6CX7 Series Motherboard
A.5 Notices:
In order for STR to function properly, several hardware and software requirements must be
satisfied:
A. Your ATX power supply must comply with the ATX 2.01 specification (provide more
than 720 mA 5V Stand-By current).
2. Jumper JP15 is provided to connect to the STR LED in your system chassis. [Your chassis
may not provide this feature.] The STR LED will be illuminated when your system is in STR
sleep mode.
RIMM LED
+
1
STR LED Connector External
37