DirecTV HD DVR User Manual page 113

Problem: Partial programming loss. Channels missing from the Guide. Channel is in the Guide but I can't tune
to it.
Your Program Guide is missing channels, or you are unable to use the guide to tune to a channel.
Possible Causes:
- The channels might be excluded from the Favorites list currently in use.
- Your satellite dish may be incorrectly configured.
- Your receiver information may need to be refreshed.
Solution:
- To change your Favorites List, press GUIDE on the remote, then press the YELLOW button and select "Change Favorites List", then
"All Channels."
- Enter the channel number using the number pad on the remote control.
- Check the dish type set in your receiver's preferences: Press MENU, then select "Parental, Fav's & Setup," "System Setup," "Info &
Test" then "More System Info." (On Standard-Definition Receivers press MENU, select "Parental, Fav's & Setup" and then "System
Setup.") Check the Satellite Dish Type shown on the System Setup screen to see if it is correct. If not, select "Satellite" from the
left menu, then select "Repeat Satellite Setup." Follow the steps. From the Satellite Dish Type screen, make sure the proper dish
type is selected.
- To refresh your receiver information, go to directv.com/reauthorize. You will need to be logged into your account on directv.com to
complete this process.
DIRECTV Receiver or TV Problems
®
Troubleshooting
CHAPTER 4 -
113