Tether Use - Graco SMART SEAT PD163434A Owner's Manual

All-in-one carseat child restraint
Table of Contents

Advertisement

All LATCH seating positions have tether anchors.
Always use tether if a vehicle tether anchor is
available in forward-facing mode with harness. Check
your vehicle owner's manual for the tether anchor
location(s). If your vehicle is not equipped with a tether
anchor, it may be possible to install one. Contact your
vehicle dealership for the proper anchor location and
installation.
NOTE: TETHER NOT TO BE USED IN
REAR-FACING MODE.
1. Check that tether is securely attached to child
restraint.
2. Fasten tether clip to anchor point
3. Tighten adjustment belt to remove any slack
4. To loosen, push button while pulling on the belt
C
as shown
.
A
.
B
.
A
B
C

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents